whiteblack
Suspension - Miata

Suspension - Miata

Beatrush Aluminum Frame Rail Reinforcement for 06-08 Miata
Part # GWR 61-0029  
This replacement is TUBULAR ALUMINUM. By weight aluminum is 6 times stronger than steel and the tubular design of this brace adds further strength to reduce NC platform flex. Beatrush products are produced by Laile after extensive testing on race tracks in Japan. Each Beatrush brace is designed to improve the responsiveness of the MX5 NC Miata platform with quality, strong, and yet light weight bolt on parts. Fits all 06+ Mazda Miata MX-5 (NCEC). Light Weight, Strong, and Rigid.
  Your Price $235.00
Beatrush Front Aluminum Performance Bar for 06-08 MX5
Part # GWR 61-0030  
Each Beatrush brace is designed to improve the responsiveness of the MX5 NC Miata platform with quality, strong, and yet light weight bolt on parts. Sorry, this brace does not fit automatic transmission.

Constructed of lightweight aluminum.
  Your Price $306.00
Beatrush Front Shock Tower Brace for 06+ Miata
Part # GWR 61-0031  
Your factory brace looks about the same but is heavy tubular steel...this replacement is all ALUMINUM. Unlike the MazdaSpeed unit, this Beatrush version is properly designed to clear the adjustment knobs of popular adjustable shocks and coilovers. If you have adjustable shocks which don't fit well with the MazdaSpeed brace then this brace is a choice for you. Note this brace DOES NOT FIT WELL WITH AC lines on US cars...it comes very close to the air conditioning lines on the driver's side and requires the air conditioning line brackets be modified/bent and protected with some fuel hose.
  Your Price $249.00
Beatrush Harness Brace Bar 06-08 Miata
Part # GWR 61-0028  
Beatrush products are produced by Laile after extensive testing on race tracks in Japan. Each Beatrush brace is designed to improve the responsiveness of the MX5 NC Miata platform with quality, strong, and yet light weight bolt on parts. Fits all 06+ Mazda Miata MX-5 (NCEC). Light Weight, Strong, and Rigid Made of Steel The Brace Bar has a special location enable installation the a racing harness (Note that bar is threaded for EYE bolts shown but does NOT include them...).
  Your Price $199.00
Beatrush PPF Performance Bar for 06-09 Miata.
Part # GWR 61-0032  
The Beatrush Miata MX5 Performance Bar restrains the MX5 suspension links and other installation points to enhance rigidity, which makes the suspension movement more precise and enhances steering response as well as traction (significantly reduces wheel hop). Reduces platform distortion to help prevent unwanted understeer. Fits all 06 and newer Mazda Miata MX-5 (NCEC). Light Weight, Strong, and Rigid. Made of Aluminum and Steel. Developed by Beatrush of Japan.
  Your Price $208.05
Beatrush Rear Performance Brace Bar for 06-09 Miata
Part # GWR 61-0033  
Each Miata Beatrush brace is designed to improve the responsiveness of the MX5 NC Miata platform with quality, strong, and yet light weight bolt on parts.

This MX5 Miata brace ties the entire rear end together to significantly stiffen the structure around the rear suspension, improving feel, and responsiveness and reducing body twist. Fits all 06 and newer Mazda Miata MX-5 (NCEC). Light Weight, Strong, and Rigid. Made of Aluminum.
  Your Price $459.80
Beatrush Rear Shock Tower Brace for 06-09 Miata
Part # GWR 61-0121  
Located in Yokohama, Japan; Laile manufactures most of their product's brands like Beatrush and Arpsports with their high precision machinery. All the unique products developed by Laile offers superior safety and plenty of pleasure both in track and the street, as well to look at. Fits all 06+ Mazda Miata MX-5 (NCEC). Light Weight, Strong, and Rigid Made of Aluminum Improves rear struts by giving the chassis more rigidity, resulting in better handling Best fitment.
  Your Price $174.80
Cobalt Sway Bar Set Front and Rear for 06-09 Miata
Part # GWR 61-0351  
The addition of Cobalt hollow sway bars will reduce your Miata's body roll, making your Miata more responsive to turning, more settled in transitions, and more fun to drive. The Cobalt sway bar sets stiffness has been carefully chosen to enhance handling and balance without ruining your ride quality. The rear bar is two position adjustable. Front bar diameter is 25 mm and rear bar is 17 mm.
  Your Price $268.00
Cusco Lower Arm Bar for 1989-97 Miata
Part # Cu Lwr Arm 89-97 Mia  
The Cusco Lower Arm Bar for the Miata will reinforce the structural integrity of the vehicle by connecting the front control arms. This reinforces the underbody and reduces chassis flexing. Cornering forces are thereby diverted to the springs and shocks, and not the chassis.Finished with a durable powder coating.
MSRP $112.70 Your Price $99.95
D2 Racing Sports RS Type Coilovers for 89+ Mazda Miata
Part # D2 RS Miata
The RS Series suspension kit is their most popular coilover. Featuring a 36-way damping and rebound adjustable monotube design, RS Series coilovers are perfect for the modified street car that also sees occasional track days. This coilover has separate height and preload adjustments allowing for optimal suspension tuning while maintaining full strut travel at all times.
Features:

  • 36-way damping adjustable monotube shock assemblies
  • Full ride height adjustability with separate spring preload
  • Anodized finish and Teflon coated threads to prevent rust
  • Upper camber plates and pillow ball mounts* (6061 Aluminum construction)
  • 1 Year Manufacturer’s Warranty
  • Serviceable in the USA


  • MSRP $1,450.00 Your Price $942.50
    Eibach Front Sway Bar for 06-09 Miata
    Part # Ei 5536.310  
    Eibach MX-5 Miata sway bars are high-performance direct replacement upgrades for the factory bars and include everything you need to bolt them on.Kit includes front bar and urethane bushings. The front bar diameter is 25.4mm, hollow. All Eibach's Mazda MX5 Sway Bars come with easy-to-read instructions and a lifetime warranty against breakage.
    MSRP $269.00 Your Price $189.00
    Eibach Pro Kit Performance Lowering Spring for 06-09 Miata
    Part # Ei 5536.140  
    Eibach's Pro-Kit is their premium suspension product. These are sport lowings springs, and they improve handling while lowering your car. These have a drop of 1.5 front and 1.3 inch rear. Front spring rate of 140 pound as compared with 110 pound stock front. Rear on this kit is 70/120 progressive.
    MSRP $329.00 Your Price $249.00
    Eibach Sport Line Lowering Springs for 06-08 Miata
    Part # Ei 4.3655  
    An extreme Lowering Spring for the Miata, the Sport Line from Eibach will lower your vehivle approximately 2 inches all the way around, For those wanting to drastically lower their vehicle. Covered by Eibach's Million Mile Warranty!
    MSRP $329.00 Your Price $249.00
    Eibach Sway Bar Kit for 06-09 MX5
    Part # Ei 5536.320  
    These Mazda MX5 sway bars increase the handling performance of your MX-5 Mazda Miata by reducing body roll. Eibach MX-5 Miata sway bars are high-performance direct replacement upgrades for the factory bars and include everything you need to bolt them on. Kit includes front and rear sway bars.
    MSRP $369.00 Your Price $279.00
    Greddy Front Strut Tower Bar
    Part # Gr 14053001
    This bay brace will help reduce body roll in the corners. Greddy makes one of the toughest and cost effective braces on the market. This brace works on: 1987-92 RX7, 1989-96 Miata without turbo, 1989-94 Eclipse, 1893-89 Starion, 1985-96 Civic, 1985-91 CRX, 1992-96 Del Sol, and 1986-96 Integra. PLEASE CHOOSE YOUR CAR UNDER **MORE INFO**
    MSRP $143.00 Your Price $135.85
    GReddy Lower Arm Bar for 1989-93 Miata - Front
    Part # Gr 14043200  
    MSRP $75.00 Your Price $71.25
    HKS Deluxe Wrench Set for HKS Coilovers
    Part # HK 1799-SA009  
    Price is for the pair of spanner wrenches to adjust the height on any model of HKS coilovers.
      Your Price $45.00
    HKS Hipermax II Coilovers for 1990-01 Miata
    Part # HK 1760-SZ002


    The HKS HyperMax II Coilovers are arguably the best suspension on the market. These dampers offer both ride height and shock dampening adjustments, providing significantly improved handling characteristics while maintaining your vehicle’s ride comfort. Ride height is adjusted by simply rotating the 60mm spring retainer perches around the chromed steel shock body, this can even be done while on the car. The dual interlocking spring retainer perches prevent spring movement and unwanted ride height changes. Dampening can be adjusted to an incredible 30 unique settings to deliver the desired shock compression and rebound stiffness for custom tailored driving characteristics ranging from daily street driver to SCCA champion.

    All HKS HyperMax II kits, unlike Tein & other "economy" coilovers, includes anodized aluminum upper pillow-ball mounts. What are pillow ball mounts & why do you need them? Pillow ball mounts are basically what go in between your shock and the shock tower on your car. The factory piece on your car now is made of rubber because its cheap & made for the average driver. Rubber obviously moves more than hardened aluminum. When you put Tein (hardened aluminum) pillow ball mounts in place of the OE rubber mounts you have a more desirable, adjustable, & predictable ride. Any avid road-racer, auto-crosser, or weekend turn warrior absolutely needs these mounts.

    Here at MVP we have had the fortune to experience virtually every suspension setup imaginable. HKS coilovers time and time again have proven themselves to be the absolute best. Each HKS Hiper Damper suspension system comes with all the need adjustment wrenches, stiffness adjusting knobs, and miscellaneous hardware for a complete installation and tuning.

    Features:
    Chromed steel shock body assembly with precision-cut threads
    Shortened cylinder body and piston stroke
    Single tube structure with large free piston
    Single tube structure with low-pressure nitrogen gas
    Dual oil and gas chambers
    Anodized aluminum pillow-ball upper mounts included - Fronts are adjustable
    Anodized aluminum spring perches
    Dual rate progressive coil springs
    Fully rebuildable

    Their spring rate is:
    Front: 6.0 kgf/mm
    Rear: 4.0 kgf/mm

    MSRP $1,970.00 Your Price $1,779.00
    HKS Shock Adjusting Tool for HKS Coilovers
    Part # HK 1799-SA025  
    Works on all models and all generations of HKS Coilovers to adjust their dampening rate.
    MSRP $20.00 Your Price $18.00
    ICR Pro 06 Mazda MX5 Strut Tower Brace
    Part # ICR MX5-14137  
    This front brace is our most popular front strut tower brace. Powder coated black for years of trouble free use. One piece makes installation a snap. It will add considerable strength to your Mazda MX-5 front end .Great looks with a great price!

    Fits 2006 Mazda MX5.
      Your Price $299.00
    ICR Pro Mazda MX5 Spring Kit 06-09
    Part # ICR MX5-14127  
    For the street or an all out race car , this HP high performance spring set will give your Mazda MX-5 the best handling available.Lowers your Mazda aprox. 1.0 inch. Fits 2006 Mazda MX-5.
      Your Price $329.00
    K-Sport Kontrol Pro Damper System for 89-up Miata
    Part # KS CMZ0x-KP
    Ksport Kontrol Pro Fully Adjustable Coilover Kits provide the ultimate in suspension technology for your street or track car. 36 levels of dampening adjustment allow you to fine tune the ride to your handling and comfort needs.The Ksport Kontrol Pro Coilover kit has been designed with professional road racing in mind offering extremely high value and performance.

    Spring Rates:
    Front 9 kg/mm / 504 lbs/in
    Rear 6 kg/mm / 336 lbs/in

    The Ksport system uses a Monotube design in which the oil and gas are separated within the cylinder. When compared to twin tube designs the Monotube dissipates heat better, allows finer dampening adjustments, and requires more expensive design process. Aeration and cavatation are a lot less common in a Monotube design, which results in a better ride.

    Product may vary from picture.

    MSRP $1,050.00 Your Price $966.00
    KW Variant 1 Coilover Kit for 1990-98 Miata
    Part # KW 10275001  

    If you are looking for one of the BEST entry level coilover kits you need look no further than KW Suspension. These kits provide the best possible solution for those of you that want to set your own ride height yet still leave the damper setting to the KW engineers who have decades of combined experience dialing suspensions on some of the worlds fastest cars. In extensive driving tests KW engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.

    • Optimally pre-set
    • Sporty harmonious damping technology
    • Stainless steel technology  "inox-line"*
    • Individually height-adjustable
    • Lowering range approved by the German Technical Control Board (TÜV)
    • Fully finished complete solutions
    • High-quality component parts for long durability
      Your Price $1,549.99
    KW Variant 1 Coilover Kit for 1999-2005 Miata
    Part # KW 10275002  

    If you are looking for one of the BEST entry level coilover kits you need look no further than KW Suspension. These kits provide the best possible solution for those of you that want to set your own ride height yet still leave the damper setting to the KW engineers who have decades of combined experience dialing suspensions on some of the worlds fastest cars. In extensive driving tests KW engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.

    • Optimally pre-set
    • Sporty harmonious damping technology
    • Stainless steel technology  "inox-line"*
    • Individually height-adjustable
    • Lowering range approved by the German Technical Control Board (TÜV)
    • Fully finished complete solutions
    • High-quality component parts for long durability
      Your Price $1,549.99
    KW Variant 1 Coilover Kit for 2006+ Miata
    Part # KW 10275009  

    If you are looking for one of the BEST entry level coilover kits you need look no further than KW Suspension. These kits provide the best possible solution for those of you that want to set your own ride height yet still leave the damper setting to the KW engineers who have decades of combined experience dialing suspensions on some of the worlds fastest cars. In extensive driving tests KW engineers have set the dampers for the best balance between sporty driving, comfort and safety. The user is then free to decide the best height setting for their use and preference.

    • Optimally pre-set
    • Sporty harmonious damping technology
    • Stainless steel technology  "inox-line"*
    • Individually height-adjustable
    • Lowering range approved by the German Technical Control Board (TÜV)
    • Fully finished complete solutions
    • High-quality component parts for long durability
      Your Price $1,729.99
    KW Variant 3 Coilover Kit for 2005+ Miata
    Part # KW 35275009  

    When it comes to race proven coilovers for the street it doesn't get any better than the KW V3. These State of the Art coilovers take technology from the many years of K&W Motorsports experience for more performance on the road. The V3 give the end user complete control of the adjustable rebound and compression damping for a unique suspension setup based on your own preferences or uses. With the patented system with its two-stage valves allows a rebound damping adjustment (comfort) and a compression adjustment (driving dynamics) in the low-speed range while the high-speed range which controls the driving safety is fixed.

    • Damping technology with individually adjustable rebound- and compression technology
    • inox-line* stainless steel technology
    • Individually height adjustable
    • Adjustment parameters approved by the German Technical Control Board (TÜV)
    • High-quality components for long durability
    • Infinitely variable rebound damping adjustment
    • 14-way adjustable compression damping
    • Unique, individually working damping force adjustment
    • Comprehensive documentation for easy use
      Your Price $2,199.99
    MX5 Front Heim HD Link for Aftermarket Bars
    Part # GWR 61-0476  
    Good-Win Racing Front MX5 streetable version Endlinks include rubber bushings to keep chatter down that is common with Heim links. Steel body. Remove those factory weak links and install these to add that last little bit of suspension detail to your ride. Sold as a pair. Similar to our race version but including bushing to prevent the "click-click" sound that comes from using our race version.
      Your Price $95.00
    MX5 Rear Heim HD Link for Aftermarket Bars
    Part # GWR 61-0477  
    These endlinks include rubber bushings to keep chatter down that is common with Heim links. Aluminum body. Remove those factory weak links and install these to add that last little bit of suspension detail to your ride. Sold as a pair. Similar to our race version but including bushing to prevent the "click-click" sound that comes from using our race version.
      Your Price $95.00
    Racing Beat Front Sway Bar MX5 06-09
    Part # RB 14108-MX  
    Although originally designed for the RX-8 application, this front bar can be used on a MX-5 when a BIG front bar is required. As compared with the stock 22mm bar, the Racing Beat 32mm (1.25") front bar is a substantial upgrade over the stock bar. Each bar is supplied with replacement urethane bushings, bar clamps, and Prothane grease.
      Your Price $195.00
    Racing Beat MX5 Suspension Springs- Soft Top
    Part # RB 54086  
    Racing Beat has designed suspension coil springs for the MX-5 Miata that are suitable for street or track use. This complete set of front and rear suspension springs were designed specifically for the MX-5 Miata by Racing Beat’s engineering staff. Ideally suited for use with the stock Mazda shocks the Racing Beat springs will interchange exactly with the stock springs.

    These springs have been designed with a rate increase of approximately 25% (front - 145 lb/in) and 25% (rear - 112 lb/in) with a modest drop of .5-inch (front & rear).
      Your Price $195.00
    Racing Beat Rear Sway Bar for MX5 06-09
    Part # RB 14109-MX  
    Although originally designed for the RX-8 application, this rear bar can be used on a MX-5 when a BIG rear bar is needed to pair up with a large front bar. Designed specfically as a matched component for our large 1.25" OD (32mm) front bar, each bar is supplied with replacement urethane bushings, bar clamps, and Prothane grease.
      Your Price $165.00
    RS*R Down Springs for 1990-98 Miata
    Part # RS*R 30-M010  
    Properly lowering a car should provide looks, performance, and feel. The RS*R Down Spring is a lowering spring which meets all of these requirements. The RS*R Down Spring is made from SUP7N, a high quality material second only to the material found in the Ti2000. Made with the same, unparalleled manufacturing process as the Ti2000, the RS*R Down Spring provides the balance that every performance enthusiast is looking for: a comfortable ride, improved handling and a lowered vehicle stance.

    These springs lower your Miata 1.4" front & 1.2" rear.
    Their spring rate is:
    Front: 3.5 kg/mm / 196 lbs/in
    Rear: 2.5 kg/mm / 140 lbs/in

      Your Price $159.00
    RS*R Down Springs for 1999-2000 Miata
    Part # RS*R 30-M020  
    Properly lowering a car should provide looks, performance, and feel. The RS*R Down Spring is a lowering spring which meets all of these requirements. The RS*R Down Spring is made from SUP7N, a high quality material second only to the material found in the Ti2000. Made with the same, unparalleled manufacturing process as the Ti2000, the RS*R Down Spring provides the balance that every performance enthusiast is looking for: a comfortable ride, improved handling and a lowered vehicle stance.

    These springs lower your Miata 1.4" front & 1.2" rear.
    Their spring rate is:
    Front: 3.5 kg/mm / 196 lbs/in
    Rear: 2.5 kg/mm / 140 lbs/in

      Your Price $179.00
    RS*R Race Springs for 1990-98 Miata
    Part # RS*R 35-M010  
    RS*R has designed a spring with the racing enthusiast in mind. The common misconception with “race” springs is that it is engineered with maximum lowering stance as the primary objective. RS*R Race Springs are made to meet the rigorous demands of those people who drive their cars on the track. Every RS*R Race Spring is manufactured from the same high quality material found in the RS*R Down Spring, SUP7N. RS*R carefully designs the Race Springs with many different factors in mind, and the result is a suspension piece highly suited for track use. In some applications, there might not be any drop at all, only an increased spring rate. In other applications, there might be an aggressive drop with an increased spring rate.

    These springs lower your Miata 1.2" front & 1.4" rear.
    Their spring rate is:
    Front: 5.6 kg/mm / 313 lbs/in
    Rear: 3.4 kg/mm / 190 lbs/in

      Your Price $189.00
    RS*R Ti2000 Springs for 1990-98 Miata
    Part # RS*R 32-M010  


    The Ti2000 is made from a revolutionary material, using a revolutionary manufacturing process. The Ti2000 is the only spring which uses a titanium composite material. The material makes the spring lighter, stronger, and comes with a lifetime warranty against sagging. The manufacturing process is also different. Everyone else uses the cold spring winding technique, while RS*R uses a hot winding technique. RS*R has found that it is in the slow heating process that is found in cold winding where structural break points are formed. RS*R uses a one of a kind “high frequency electronic induction heating machine” which heats the spring to the correct temperature in 8-16 seconds. This coupled with another annealing cycle and a hot shot peening cycle create the Ti2000 spring.

    For extensive technical information, specifications, and more manufacturing details of the special processes used to produce the Ti2000 springs, please click here.

    These springs lower your Miata 1.4" front & 1.2" rear.
    Their spring rate is:
    Front: 196 lbs/in
    Rear: 140 lbs/in

      Your Price $249.00
    Stance GR+ Coilovers for 90-05 Miata
    Part # STA NXXX-GRPLUS
    GR+ is Stance's main flagship line of coilovers. Oversize diameter shocks allow large pistons for ultimate performance and response.
    15-way adjustable damping allows the driver to tune the shocks for any conditions and handling characteristics.

    Spring Rates
    Front 8 k/mm
    Rear 6 k/mm

    With huge range of adjustment that can be felt and seen, GR+ offers serious performance for all levels of drivers.
    GR+ coilovers are built with highest quality materials and tolerances to ensure durability and performance.
    Picture may differ from actual product.
    MSRP $1,215.00 Your Price $1,032.75
    Suspension Techniques Lowering Springs for 1990-97 Miata
    Part # ST 60330  


    Price is for all 4 linear lowering springs. Lowers your Miata 1.0” all the way around.

    MSRP $249.00 Your Price $205.00
    Suspension Techniques Lowering Springs for 99+ Miata
    Part # ST 60332  


    Price is for all 4 linear lowering springs. Lowers your Miata 1.5” in front and back.

    MSRP $259.00 Your Price $205.00
    Suspension Techniques Sway Bars for 1990-98 Miata
    Part # ST 52195  


    Sway bars are one of the very best suspension upgrades you can do to your Miata. These bars are 1” thick in the front and ¾” thick in the rear. Anti-Sway Bars are designed to improve handling and steering response by minimizing body roll. Suspension Techniques designs each bar specific to the needs of the car it is intended for. Tight bar bends hug the undercarriage providing improved ground clearance and easy installation. Tighter bends, properly engineered mounting hardware, and the use of low deflection urethane bushings allow the bar to work at its maximum potential. Each bar is covered with a high quality powder coat finish and limited lifetime warranty. They keep your Miata very flat when cornering, thereby eliminating excessive roll and giving you a much more positive feel around corners. These are ideal for every day street Miatas as well as full blown road/track Miatas. The rear bar has two link mount choices to assist you in tuning the over/under steer of your Miata.

    MSRP $415.00 Your Price $320.00
    Suspension Techniques Sway Bars for 99+ Miata
    Part # ST 52197  


    Sway bars are one of the very best suspension upgrades you can do to your Miata. These bars are 1” thick in the front and 9/16” thick in the rear. Anti-Sway Bars are designed to improve handling and steering response by minimizing body roll. Suspension Techniques designs each bar specific to the needs of the car it is intended for. Tight bar bends hug the undercarriage providing improved ground clearance and easy installation. Tighter bends, properly engineered mounting hardware, and the use of low deflection urethane bushings allow the bar to work at its maximum potential. Each bar is covered with a high quality powder coat finish and limited lifetime warranty. They keep your Miata very flat when cornering, thereby eliminating excessive roll and giving you a much more positive feel around corners. These are ideal for every day street Miatas as well as full blown road/track Miatas. The rear bar has two link mount choices to assist you in tuning the over/under steer of your Miata.

    MSRP $459.00 Your Price $345.00
    Tein Basic Coilovers for 1990-05 Miata
    Part # Tein DSM64-LUSS2  
    If you are looking for ride-height adjustable coilovers and are on a tight budget, these Tein Basic coilovers are the answer!

    Note that you can not adjust the dampening (softness or hardness) of your ride with these coilovers, only the height of your car.

    These coilovers are not compatible with Tein upper pillowball mounts nor the Tein EDFC system.

    MSRP $900.00 Your Price $810.00
    Tein EDFC Kit for use with Miata Tein Flex Coilovers
    Part # Tein EDK04/05-12120  


    The Tein EDFC (Electronic Damping Force Controller) makes it possible for the driver to control the damping force on the coilovers while sitting & driving the car. The EDFC accomplishes this by adjusting a motor installed in the shock absorber. Since the damping force can be manually controlled with ease to meet different situations, the driver can enjoy variations in the suspension setting from the comfort of the driver's cabin. The EDFC is designed to work with Tein's Flex coilovers. Even though people have successfully used the EDFC with other kits such as the HA's, we can not guarantee its functionality except with the Flex kit.

    MSRP $418.00 Your Price $376.20
    Tein Flex Coilovers for 1990+ Miata
    Part # Tein DSM40-6USS1  


    Tein Type Flex damper kit was designed to provide driving comfort and sports performance with its full-length adjustment system. Tein has incorporated separate height and preload adjustments, which allows you to have various set-ups to meet different road conditions. The FLEX Damper kit includes pillow ball upper mounts and is compatible with the EDFC, for maximum performance for the streets.

    • Full-length adjustment and height adjustment for separate setting of the height and spring preload.
    • 16 levels of damping force adjustment (compression and rebound together).
    • Teflon coating for rust prevention.
    • Newly designed spring seat and spring seat lock for easy height adjusting.
    • Pillow ball upper mounts are included.
    • Compatible with EDFC.
    • Available for overhaul.


    Click Here to visit Tein’s website for more information.

    MSRP $1,690.00 Your Price $1,521.00
    Tein Flex Coilovers for 2006+ Miata
    Part # Tein DSM84-6USS1  
    The Tein Flex coliover is one of the most advanced coliover systems manufactured. The Flex dampening system can be controlled manually or electronically in conjunction with the Tein EDFC control kit (sold separately).
    MSRP $1,840.00 Your Price $1,656.00
    Tein HA Upper Pillowball Mounts for 1990-98 Miata – Front
    Part # Tein PRM38-31S65  


    What are pillow ball mounts & why do you need them? Pillow ball mounts are basically what go in between your shock and the shock tower on your car. The factory piece on your car now is made of rubber because its cheap & made for the average driver. Rubber obviously moves more than hardened aluminum. When you put Tein (hardened aluminum) pillow ball mounts in place of the OE rubber mounts you have a more desirable, adjustable, & predictable ride. Any avid road-racer, auto-crosser, or weekend turn warrior absolutely needs these mounts. The price is for a pair (driver & passenger side) of pillow ball mounts.

    MSRP $240.00 Your Price $216.00
    Tein HA Upper Pillowball Mounts for 99+ Miata – Front
    Part # Tein PRM40-31S65  


    What are pillow ball mounts & why do you need them? Pillow ball mounts are basically what go in between your shock and the shock tower on your car. The factory piece on your car now is made of rubber because its cheap & made for the average driver. Rubber obviously moves more than hardened aluminum. When you put Tein (hardened aluminum) pillow ball mounts in place of the OE rubber mounts you have a more desirable, adjustable, & predictable ride. Any avid road-racer, auto-crosser, or weekend turn warrior absolutely needs these mounts. The price is for a pair (driver & passenger side) of pillow ball mounts.

    MSRP $180.00 Your Price $162.00
    Tein S-Tech Springs for 1999+ Miata
    Part # Tein SKM44-AUB00  
    Tein S-Tech Springs are an excellent step towards suspension tuning. They offer a 0.9" drop in the front and a 1.2" drop in the rear for a more aggressive appearance. Their spring rate is:
    Front: 4.2 kg/mm / 235 lbs/in
    Rear: 3.1 kg/mm / 173 lbs/in

    Comes with a 1 year limited manufacturer warranty. Spring length is guaranteed not to sag more than 5mm and to be clear of any manufacture defects.

    • One year limited manufacturer warranty.
    • High-grade material adapted to improve guaranteed satisfaction.
    • Rubber spring protector sheet to prevent noise (most applications).


    MSRP $230.00 Your Price $172.50
    Tein Super Street Coilovers for 1990-05 Miata
    Part # Tein DSM64-KUSS2  


    TEIN has developed advanced technology to design the shell case and stroke to bring out the full potential of your vehicle.
    These features of the TEIN Super Street Damper kit were designed with greater performance to satisfy all your driving demands. This high performance damper can be used for weekend racing and/or daily driving.
    The discomfort caused by uneven roads or bumps are eliminated on daily street use. For race use, the ride height adjustable system enables you to adjust ride height and 16 levels of damping force.
    In other words, you can set your vehicle to meet all situations!

    • High performance and cost effective.
    • 16 levels of damping force adjustment (compression and rebound together).
    • Ride height adjustable.
    • New paint coating for rust prevention.
    • Pillow ball mounts are are included.
    • Exclusive design for USA vehicle specifications (only available for the U.S.A Market).
    • EDFC Compatible.

    MSRP $1,200.00 Your Price $1,080.00
    Tein Super Street Coilovers for 2006+ Miata
    Part # Tein DSM84-2USS3  


    TEIN has developed advanced technology to design the shell case and stroke to bring out the full potential of your vehicle.
    These features of the TEIN Super Street Damper kit were designed with greater performance to satisfy all your driving demands. This high performance damper can be used for weekend racing and/or daily driving.
    The discomfort caused by uneven roads or bumps are eliminated on daily street use. For race use, the ride height adjustable system enables you to adjust ride height and 16 levels of damping force.
    In other words, you can set your vehicle to meet all situations!

    • High performance and cost effective.
    • 16 levels of damping force adjustment (compression and rebound together).
    • Ride height adjustable.
    • New paint coating for rust prevention.
    • Pillow ball mounts are are included.
    • Exclusive design for USA vehicle specifications (only available for the U.S.A Market).
    • EDFC Compatible.

    MSRP $1,540.00 Your Price $1,386.00
    Top Speed Front Strut Bar for 1990-98 Miata
    Part # TS Mia 98 Strut Frnt  
    Polished aluminum bar with krylon red, blue, or black ends. The ends can *easily* be repainted to any color you want.
    MSRP $115.00 Your Price $69.95
    1