Cooling Components - 1993-98 Supra

Cooling Components - 1993-98 Supra

FREE SHIPPING ARC Titanium Hood Panel for 1993-98 Toyota Supra - CURRENTLY IN STOCK
Part # ARC ATFPJZA8
The ARC Hood Panel is designed to direct the air that typically goes around the radiator and FORCES it to flow through it instead. It not only looks amazing but also increases performance by dropping coolant temperatures due to the increased air flow. Constructed of 100% titanium the panel is extremely lightweight. Set yourself apart from the others with an ARC Hood Panel. These are typically a special order item from Japan but we currently have it in stock ready to ship. Order while supplies last!!
MSRP $311.00
Your Price $279.90
Sale Price $245.00

AAP Motorsports Dual Fan Kit with Shroud for 1993-98 Supra - Polished
Part # AAP Shroud Polished
Finally!! A fan kit worthy of the Supra!! This kit is a bolt-on to every radiator: OEM, Fluidyne, Griffin, PWR, Koyo. This kit includes 2 of the highest flowing Zirgo fans available. The stock clutch fan produces 3,300 CFM of air. The dual Flex-A-Lite fans produce a low 1,200 CFM. This dual fan kit produces 3,350 to 3,400 CFM! No more worries of overheating by installing an aftermarket kit! The aluminum shroud measures 29 x 19 x 2.37" thick. The price includes the custom shroud and both fans, fully assembled and ready to install! All you do is wire it up to anything that gets power power when you start your Supra (alternator for example). No thermostat necessary! For a large picture of this kit click here. Click here and here for pictures of this fan kit installed. Look how much room it cleans up in the engine bay!! It is mated with a Fluidyne radiator for the ultimate in cooling. Note that if you have a PWR radiator that we recommend you purchase the $5 bracket made to fit this kit directly onto the PWR with no modifications. Note that if you have a Fluidyne radiator that there is 1 bracket on the Fluidyne you will need to bend 180 degrees. This is done easily with a set of pliers and does no harm to the radiator in any way, you are simply bending a bracket.
MSRP $449.00
Your Price $399.00

Blitz Cooling Performer for 1993-98 Supra TT - 2JZGTE
Part # Bl 75440
The Blitz Cooling Performers were designed to replace the factory radiator hoses for specific vehicle applications. Made from high-quality Silicone, the Blitz Cooling Performers are able to withstand extreme heat conditions and high pressure whilst providing an additional tap to make any installation of a Temperature gauge simple. Blitz Cooling Performer Kits include all necessary hardware, plugs, and clamps. Pictured is the cooling performer for the Subaru.
MSRP $120.00
Your Price $102.00

Boost Logic Turbo Blanket
Part # Boost Logic Blanket
Turbos get very hot as we all know. Sometimes they get so hot they can melt electronics and effect the paint on the hood! This is the best, easiest, and cheapest way to keep your turbo from causing any damage to the rest of your car. The heat blanket works so well in keeping under hood temperature down that you can rest your hand on the blanket without being burned. The silver blanket is a little larger and fits virtually any T4 style turbo of any size. The black blanket is slightly smaller and both fit on a turbo as large as a 76mm. Click here for pictures of this blanket installed. Please select black or silver below!
MSRP $175.00
Your Price $150.00

Fluidyne Aluminum Radiator for 1993-98 Supra
Part # Fl 11-93SUPRA
This radiator is twice the thickness of your plastic Toyota radiator to give you the extra cooling you need. Even though its much thicker, it still works with your stock radiator fan, or the Powerhouse electric fans. This is a direct-fit unit requiring no modification to your Supra if you are a 6-speed TT or 5-speed N/A. This upgrade is a must for road racers and those that live in hot climates. Expect to actually GAIN a few horsepower (5-10) due to the extra cooling of your engine! Includes a Fluidyne radiator cap, please use it for best results. If you are a TT or N/A with automatic transmission: Your stock radiator has an allowance built into it for cooling your transmission. If you replace your radiator with an aftermarket one such as this Fluidyne, this allowance will be removed with the stock radiator. You must purchase a transmission cooler and we highly recommend you also purchase the Spal 7.5 fan to push extra air through your new tranmission cooler. The transmission cooler and Spal fan will keep your automatic running cooler and better than it ever has!
MSRP $599.99
Your Price $489.00

Greddy Oil Cooler Kit for 1993-98 Supra - 10 Row
Part # Gr 12014613
Adding a Single Turbo to your Supra is a major alteration from what Toyota intended. One thing very commonly overlooked when upgrading to a Single is what this does to your oil temps. Think about it for a minute and you will realize how important an oil cooler is. This is NOT the item you want to "wait until later" to get! Greddy Oil Cooler Kits help prolong the life of your engine components and oil. Your stock oil cooler is a joke...its a tiny water-cooled device sandwiched between the oil filter and engine block. By using a similar inner-fin core design as the high-quality Greddy intercoolers, these coolers increase oil capacity, decrease oil temperatures, and extend engine and oil life. The efficient core and durable steel-braided lines insure good flow and a leak free installation. These work on autos, 6-speeds, & even N/A's. We recommend this 10 row kit mainly to Automatic Supras because its smaller & easier to fit in their cramped area than the 16 row. Rather you are road-racing, driving to work, or drag racing, you should have one of these in your Supra already, if you don't, quit putting it off! Replacing your motor is much more expensive than this simple bolt-on upgrade. Dimensions of this oil cooler are 299mm long x 142.6mm tall x 50mm wide. Exact picture shown of the Supra 10-Row Oil Cooler! Click here for a large picture of this exact oil cooler.
MSRP $710.00
Your Price $674.50

Greddy Oil Cooler Kit for 1993-98 Supra - 16 Row
Part # Gr 12014615
Adding a Single Turbo to your Supra is a major alteration from what Toyota intended. One thing very commonly overlooked when upgrading to a Single is what this does to your oil temps. Think about it for a minute and you will realize how important an oil cooler is. This is NOT the item you want to "wait until later" to get! Greddy Oil Cooler Kits help prolong the life of your engine components and oil. Your stock oil cooler is a joke...its a tiny water-cooled device sandwiched between the oil filter and engine block. By using a similar inner-fin core design as the high-quality Greddy intercoolers, these coolers increase oil capacity, decrease oil temperatures, and extend engine and oil life. The efficient core and durable steel-braided lines insure good flow and a leak free installation. These work on autos, 6-speeds, & even N/A's. We recommend this 16 row kit mainly to Manual Transmission Supras as it fits nicely and the extra 6 rows provide additional cooling. You can fit this on an Automatic Supra as well, but finding a location and angle can be more difficult compared to a Manual Supra. Rather you are road-racing, driving to work, or drag racing, you should have one of these in your Supra already, if you don't, quit putting it off! Replacing your motor is much more expensive than this simple bolt-on upgrade. Dimensions of this oil cooler are 299mm long x 233.2mm tall x 50mm wide. Exact picture shown of the Supra 16-Row Oil Cooler! Click here for a large picture of this exact oil cooler.
MSRP $880.00
Your Price $836.00

Greddy Oil Cooler Kit for 1993-98 Supra - 16 Row Plus Filter Relocation Kit
Part # Gr 12014405
Adding a Single Turbo to your Supra is a major alteration from what Toyota intended. One thing very commonly overlooked when upgrading to a Single is what this does to your oil temps. Think about it for a minute and you will realize how important an oil cooler is. This is NOT the item you want to "wait until later" to get! Greddy Oil Cooler Kits help prolong the life of your engine components and oil. Your stock oil cooler is a joke...its a tiny water-cooled device sandwiched between the oil filter and engine block. By using a similar inner-fin core design as the high-quality Greddy intercoolers, these coolers increase oil capacity, decrease oil temperatures, and extend engine and oil life. The efficient core and durable steel-braided lines insure good flow and a leak free installation. These work on autos, 6-speeds, & even N/A's. We recommend this 16 row kit mainly to Manual Transmission Supras as it fits nicely and the extra 6 rows provide additional cooling. You can fit this on an Automatic Supra as well, but finding a location and angle can be more difficult compared to a Manual Supra. Rather you are road-racing, driving to work, or drag racing, you should have one of these in your Supra already, if you don't, quit putting it off! Replacing your motor is much more expensive than this simple bolt-on upgrade. Dimensions of this oil cooler are 299mm long x 233.2mm tall x 50mm wide. Exact picture shown of the Supra 16-Row Oil Cooler with Oil Filter Relocation Kit! Click here for a large picture of this exact oil cooler.
MSRP $1,250.00
Your Price $1,187.50

Koyo Radiator for 1993-98 Supra
Part # Koyo R1856
Koyo radiators are perfect for turbo charged, super charged, & nitrous oxide equipped engines. These radiators provide 20% to 30% more cooling than standard radiators and are able to handle high revving and high performance engines. Also they are custom built to OEM fit, all the radiator cores and tanks are specifically designed and built for each application. No universal fitparts are used. This ensures a proper fit, just like your original equipment! Koyo radiators are made from aircraft quality aluminum and Heli-arc welded and fully polished to a mirror finish. If you are a TT or N/A with automatic transmission: Your stock radiator has an allowance built into it for cooling your transmission. If you replace your radiator with an aftermarket one such as this Koyo, this allowance will be removed with the stock radiator. You must purchase a transmission cooler and we highly recommend you also purchase the Spal 7.5 fan to push extra air through your new tranmission cooler. The transmission cooler and Spal fan will keep your automatic running cooler and better than it ever has!
MSRP $527.53
Your Price $433.00

Meziere Electric Water Pump for 1993-98 Supra
Part # Mez WP520
This electric water pump is a direct replacement. Don't replace your old water pump with a stock unit. Whether as a precaution to water pump failure or an upgrade this is a nice upgrade to have. Help improve coolant flow and make power at the same time by eliminating the parasitic drain the stock pump has on the engine. This pump is a straight bolt-on and uses the stock size belt. Just wire this pump up to run when the car turns on. Also great for cooling engines down in between drag passes or road-race events as you can wire an additional switch so that it runs when your engine is off to cool it off quickly. This pump is great for any engine, stock, fully built, or anywhere in between. Good to do when the timing belt is being replaced.
MSRP $399.95
Your Price $379.00

Mishimoto Aluminum Fan Shroud for 93-98 Toyota Supra
Part # Mish MMFS-SUP-93T
The Mishimoto Toyota Supra aluminum fan shroud kit will considerably improve engine cooling functions and the overall performance of your vehicle. All Mishimoto fan shrouds are significantly lighter than standard fan shrouds, and are a direct OEM fit. A Mishimoto fan shroud will effectively drive out heat from the engine bay and deliver more air to the Supra aluminum radiator, while at the same time serving another very important purpose; securing the fan blades. The fan shroud will keep the fan blades in place, which otherwise could potentially damage other essential components in your engine.
MSRP $265.00
Your Price $185.50

Mishimoto Racing Thermostat for 1993-1998 Toyota Supra Twin Turbo
Part # Mish MMTS-SUP-93T
The Mishimoto racing thermostat for the 1993-1998 Toyota Supra will promote greater cooling efficiency throughout your engine. The Mishimoto racing thermostat will significantly lower high engine temperature produced by modified and upgraded turbo applications. Once the engine is fully warmed up the Mishimoto racing thermostat will open up at a lower temperature than standard thermostats, also allowing the coolant to flow through the engine sooner thus reducing and maintaining cooler engine temperatures.
MSRP $80.00
Your Price $60.00

Mishimoto Radiator for 1993-98 Supra
Part # Mish MMRAD-SUP-93T
The cheapest radiator we offer for the Supra, the Mishimoto radiator is made from brazed aluminum and expected to be an OEM fit. If you are a TT or N/A with automatic transmission: Your stock radiator has an allowance built into it for cooling your transmission. If you replace your radiator with an aftermarket one such as this one, this allowance will be removed with the stock radiator. You must purchase a transmission cooler and we highly recommend you also purchase the Spal 7.5 fan to push extra air through your new tranmission cooler. The transmission cooler and Spal fan will keep your automatic running cooler and better than it ever has!
MSRP $390.00
Your Price $270.00

MVP Motorsports Turbo Blanket
Part # MVP Blanket
Turbos get very hot as we all know. Sometimes they get so hot they can melt electronics and effect the paint on the hood! This is the best, easiest, and cheapest way to keep your turbo from causing any damage to the rest of your car. The heat blanket works so well in keeping under hood temperature down that you can rest your hand on the blanket without being burned. The silver blanket is a little larger and fits virtually any T4 style turbo of any size. The black blanket is slightly smaller and both fit on a turbo as large as a 76mm. Please select black or silver below!
MSRP $160.00
Your Price $150.00
Sale Price $140.00

MVP Motorsports Turbo Blanket - Chrome
Part # MVP Blanket Chrome
Turbos get very hot as we all know. Sometimes they get so hot they can melt electronics and effect the paint on the hood! This is the best, easiest, and cheapest way to keep your turbo from causing any damage to the rest of your car. The heat blanket works so well in keeping under hood temperature down that you can rest your hand on the blanket without being burned. This blanket is about the same size as our black blanket and will fit small turbos up to most 74mm and 76mm turbos, depending on the size of your exhaust housing.
MSRP $175.00
Your Price $150.00

Powerhouse Racing Front Radiator Panel for 1993-98 Supra - Polished
Part # PHR Shield MK4 Pol
This panel will fit turbo, non-turbo, factory intercooler as well as front mounted intercooler setups. It is a bolt-on part that takes less than 15 minutes to install by the average do-it-yourselfer. This custom panel was hand-designed by Powerhouse Racing while the industrial grade aluminum is fabricated using laser cutting technology. Not only does this panel create a visual impact, it also plays a vital role in the cooling system. When front mount intercoolers are installed in Supras, the stock front radiator shroud needs to be removed. The stock shroud is designed to direct the airflow through the radiator, preventing the air from going around. With the stock shroud removed, there is a reduction in cooling efficiency, especially at higher speeds where the fans cannot provide the airflow, since they are not on, robbing your car of potential horsepower. At low speeds the front shroud also allows the fans to operate efficiently as well. By putting an intercooler in front of the radiator, you not only divert the airflow but also heat up the air that manages to make it to the radiator. This Front Radiator Panel prevents the air from rising up over the radiator and loosing crucial horsepower. For you wrenchers, it makes a great place to lay your tools and miscellenous parts while you're working on your car! It is made out of industrial grade aluminum for lighter weight and better heat insulation.
Your Price $129.00

Powerhouse Racing Polished Upper Radiator Pipe Kit for 1993-98 Supra Twin Turbo
Part # PHR Upper Rad Pipe
This is a direct replacement for the factory upper radiator hose, which tends to droop onto the accessory drive belt, eventually causing hose failure. Consists of one T304 Stainless Steel hard pipe, fully polished, with black silicone hose ends and clamps. This pipe is extremely polished & matches HKS or Greddy Intercooler pipes. Includes your choice of black, dark blue (matches Greddy), or red silicone.
Your Price $125.00

PWR Radiator for 1993-98 Supra
Part # PWR 01031934
This PWR all-aluminum radiator is 57mm thick...not only thicker than stock but also 19mm thicker than Fluidyne. However, because of how thick this radiator is, you may have to fabricate custom brackets or otherwise modify your Supra to complete the installation. This PWR is NOT a direct drop-in like the Fluidyne. If you are a TT or N/A with automatic transmission: Your stock radiator has a small fan built into it for cooling your transmission. If you replace your radiator with an aftermarket one such as this PWR, this fan will be removed with the stock radiator. You must purchase a transmission cooler and we highly recommend you also purchase the Spal 7.5 fan to push extra air through your new tranmission cooler.
MSRP $663.00
Your Price $572.00

Spal 13'' Push Fan for Radiator / FMIC
Part # Spal 30100399
This fan is intended for use with any Supra with a Front Mount Intercooler (FMIC), but is especially crucial for an Automatic Supra. You mount it in between your FMIC and your radiator, attached directly to your radiator / AC Condensor. This grabs all the air coming through your FMIC and forces it through your radiator. This fan works great with aftermarket radiators too as they remove the fan that is part of the Automatic Toyota radiator. This fan also adds extra cooling to Supras with a FMIC (i.e. Non-Turbo Supras or TT Supras with a stock intercooler)! The dimensions are 14.17" x 2.05" x 13.62". It flows an incredible 920cfm (cubic foot per minute)!!
MSRP $140.00
Your Price $87.00

Titek Carbon Fiber Radiator Cooling Plate for 1993-98 Supra - Dry
Part # Titek CFP-84001D
MVP and Titek have partnered together to bring you the highest quality carbon fiber radiator plate made. This piece is made from real carbon fiber. This is not just a straight plate, as you see from the picture it has a very intricate design to it and covers a larger area than any plate on the market. There are cheaper cooling plates on the market. There is not, however, a better looking, better designed, better quality plate. This fits Twin Turbo & N/A the same, no problem. Please note you will need to have your OEM radiator overflow tank relocated. Virtually all FMIC kits does this, or you can relocate it easily yourself even if you do not have a FMIC. This is the dry version, meaning it has a matte finish. For more pictures click here.
MSRP $215.00
Your Price $185.00

Titek Carbon Fiber Radiator Cooling Plate for 1993-98 Supra - Wet
Part # Titek CFP-84001W
MVP and Titek have partnered together to bring you the highest quality carbon fiber radiator plate made. This piece is made from real carbon fiber. This is not just a straight plate, as you see from the picture it has a very intricate design to it and covers a larger area than any plate on the market. There are cheaper cooling plates on the market. There is not, however, a better looking, better designed, better quality plate. This fits Twin Turbo & N/A the same, no problem. Please note you will need to have your OEM radiator overflow tank relocated. Virtually all FMIC kits does this, or you can relocate it easily yourself even if you do not have a FMIC. This is the wet version, meaning it has a glossy finish. For more pictures click here.
MSRP $195.00
Your Price $165.75

1