×
close

Moroso

Moroso Race/Street Air Cleaner 66310

click to zoom in

MOROSO HIGH FLOW AIR INDUCTION SYSTEM
Making horsepower is as easy as replacing your stock air cleaner assembly with a Moroso bolt-in High Flow Air Induction System. More air means more power, and with our computer designed inlet duct and ultra-low restriction filter element you get a huge increase in airflow over your stock system. The end result is more horsepower for significantly lower 0-60 mph and quarter mile times.

Every component in our High Flow Air Induction System is manufactured with superior materials and craftsmanship. From the rotationally molded air inlet ducts, to stainless steel clamps and the ultra-low restriction filter element, the quality of Moroso’s Air Induction Systems is far superior to other brands. Despite the quality workmanship, premium materials and performance benefits, they are competitively priced.

  • High flow 4-ply cotton gauze for maximum performance & filtration efficiency
  • Can be cleaned & re-oiled back to factory specification
  • Designed & manufactured to last the life of vehicle
  • Manufactured in the USA
  • Includes all hardware and easy-to-follow instructions
  • Use K&N Filter Service Kit No. 99-5000 for service

LOW-PROFILE RACING AIR CLEANERS
For years, Moroso Air Cleaners and accessories have set the standard by which all others are judged. Whether in triple process chrome steel, powdercoat or our unique fiber design, Moroso Air Cleaners provide the racer or street performance enthusiast with improved air flow, a lower stacking height, and unequalled fit and finish. Moroso Air Cleaners and accessories are simply the best money can buy!

  • Moroso’s unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow
  • Radiused air inlet is stamped into air cleaner base to reduce overall height
  • Air Cleaners with 3” element have an overall stacking height above the carburetor lip of only 2-1/2”, while 5” filters have a 4-1/2” overall height
  • Fits all Holley®, Carter, Rochester, and Edelbrock carburetors with 5-1/8” diameter necks
  • Back to back dyno testing proves a gain of nearly 10 horsepower over running no air cleaner at all
  • Available in hand polished triple process chrome, black or clear powdercoat and our unique fiber design to match or complement a variety of Moroso engine accessories including valve covers, breathers and ignition wire sets
  • Includes matching wing nut

FIBER DESIGN LOW-PROFILE RACING AIR CLEANERS

  • Classic Moroso high flow, low stacking height design
  • Increased horsepower with great fiber design look
  • Includes wing nut, stud and 90º fitting for PVC hose

FLAT BOTTOM RACING AIR CLEANERS

  • Flat bottom design raises installed height of air cleaner for additional sheet metal clearance in race cars such as NASCAR® Modifieds
  • 14” diameter Air Cleaners available with 3” or 5” filter elements
  • Chrome plated steel
  • Fits Holley®, Carter, Edelbrock and Rochester carburetors

OFFSET AIR CLEANERS

  • Owners of Small Block Chevy powered cars with 2- and 4-bbl. Holley® carbs with 5-1/8” necks don’t have to cut up their air cleaners to make room for large diameter distributors, such as HEI
  • Offset forward by 1-1/2” to clear GM HEI distributors
  • For IMCA and NASCAR® Modifieds that require air cleaners to be mounted above the hood line, the raised bottom (3/8”) design provides an overall height above the carburetor lip of 4-3/4”
  • For late model stocks that require under-hood air cleaners, the dropped (1-3/4”) design provides an overall height above the carburetor lip of 2-3/4”
  • Finished in clear powdercoat and comes complete with 4” filter elements, one 1/4” -20 and one 5/16” -18 offset stud and three 1/4”
    -20 and three 5/16” -18 hex nuts

RACE/STREET AIR CLEANERS

  • 11-1/2” and 8-1/2” Diameters
  • Available in black, red and blue powdercoat and ultra-high luster, hand polished triple-process, chrome plated steel
  • PCV adapter and matching wing nut included
  • Fits Holley®, Thermoquad, Quadrajet and similar carburetors with a 5-1/8” diameter

REUSABLE FOAM FILTER SHIELD

  • When dirt and clay oval tracks turn into “dust bowls”, even the best racing air cleaners can become clogged with dirt and dust
  • Made of open cell foam to keep large debris out of the filter element without restricting airflow
  • Fits snugly around 14” x 5” racing filters
  • Can be cleaned in the sink or even in the washing machine
  • Excellent for off-road truck applications
  • One per pack

AIR CLEANER WING NUT

  • Can be used with any Moroso Air Cleaner
  • They also match our extra long Valve CoverWing Nuts to add a look of uniformity to engine compartment
  • Made to fit only 1/4” -20 studs
  • Fits most popular air cleaners
  • One per pack

CARBURETOR AIR PAN KITS

  • Available for either single or dual carb applications
  • Unlike other brands, our Air Pan Kits are designed with a smooth radius at the intake area of the carburetor for improved airflow
  • Air Pan-to-hood sealing ring is manufactured of fire retardant foam, for added protection
  • All Air Pans measure 12” x 24”. Fire retardant foam measures 1-1/2” wide x 4” tall x 60” long

AIR CLEANER STUD ADAPTER

  • Allows Moroso and other air cleaners with 1/4” stud and wing nut to be used on carburetors with a 5/16” mounting hole
  • One end of the adapter features a 5/16” -18 male thread that screws into the carburetor, the other end features a 1/4” -20 female thread that accepts a standard air cleaner mounting stud
  • Clear zinc plating resists corrosion
  • Overall length: 7/8”
  • One per pack

Application:
  • UNIVERSAL NON APPLICATION SPECIFIC

Moroso

Moroso Race/Street Air Cleaner 66310

Write a Review
Part Number:
66310
MSRP:
Your Price: $96.98
Deal ends in:
Nov 27 2023, 00:00:01


MOROSO HIGH FLOW AIR INDUCTION SYSTEM
Making horsepower is as easy as replacing your stock air cleaner assembly with a Moroso bolt-in High Flow Air Induction System. More air means more power, and with our computer designed inlet duct and ultra-low restriction filter element you get a huge increase in airflow over your stock system. The end result is more horsepower for significantly lower 0-60 mph and quarter mile times.

Every component in our High Flow Air Induction System is manufactured with superior materials and craftsmanship. From the rotationally molded air inlet ducts, to stainless steel clamps and the ultra-low restriction filter element, the quality of Moroso’s Air Induction Systems is far superior to other brands. Despite the quality workmanship, premium materials and performance benefits, they are competitively priced.

  • High flow 4-ply cotton gauze for maximum performance & filtration efficiency
  • Can be cleaned & re-oiled back to factory specification
  • Designed & manufactured to last the life of vehicle
  • Manufactured in the USA
  • Includes all hardware and easy-to-follow instructions
  • Use K&N Filter Service Kit No. 99-5000 for service

LOW-PROFILE RACING AIR CLEANERS
For years, Moroso Air Cleaners and accessories have set the standard by which all others are judged. Whether in triple process chrome steel, powdercoat or our unique fiber design, Moroso Air Cleaners provide the racer or street performance enthusiast with improved air flow, a lower stacking height, and unequalled fit and finish. Moroso Air Cleaners and accessories are simply the best money can buy!

  • Moroso’s unique radiused air inlet design equalizes air pressure past the boosters for uniform air flow
  • Radiused air inlet is stamped into air cleaner base to reduce overall height
  • Air Cleaners with 3” element have an overall stacking height above the carburetor lip of only 2-1/2”, while 5” filters have a 4-1/2” overall height
  • Fits all Holley®, Carter, Rochester, and Edelbrock carburetors with 5-1/8” diameter necks
  • Back to back dyno testing proves a gain of nearly 10 horsepower over running no air cleaner at all
  • Available in hand polished triple process chrome, black or clear powdercoat and our unique fiber design to match or complement a variety of Moroso engine accessories including valve covers, breathers and ignition wire sets
  • Includes matching wing nut

FIBER DESIGN LOW-PROFILE RACING AIR CLEANERS

  • Classic Moroso high flow, low stacking height design
  • Increased horsepower with great fiber design look
  • Includes wing nut, stud and 90º fitting for PVC hose

FLAT BOTTOM RACING AIR CLEANERS

  • Flat bottom design raises installed height of air cleaner for additional sheet metal clearance in race cars such as NASCAR® Modifieds
  • 14” diameter Air Cleaners available with 3” or 5” filter elements
  • Chrome plated steel
  • Fits Holley®, Carter, Edelbrock and Rochester carburetors

OFFSET AIR CLEANERS

  • Owners of Small Block Chevy powered cars with 2- and 4-bbl. Holley® carbs with 5-1/8” necks don’t have to cut up their air cleaners to make room for large diameter distributors, such as HEI
  • Offset forward by 1-1/2” to clear GM HEI distributors
  • For IMCA and NASCAR® Modifieds that require air cleaners to be mounted above the hood line, the raised bottom (3/8”) design provides an overall height above the carburetor lip of 4-3/4”
  • For late model stocks that require under-hood air cleaners, the dropped (1-3/4”) design provides an overall height above the carburetor lip of 2-3/4”
  • Finished in clear powdercoat and comes complete with 4” filter elements, one 1/4” -20 and one 5/16” -18 offset stud and three 1/4”
    -20 and three 5/16” -18 hex nuts

RACE/STREET AIR CLEANERS

  • 11-1/2” and 8-1/2” Diameters
  • Available in black, red and blue powdercoat and ultra-high luster, hand polished triple-process, chrome plated steel
  • PCV adapter and matching wing nut included
  • Fits Holley®, Thermoquad, Quadrajet and similar carburetors with a 5-1/8” diameter

REUSABLE FOAM FILTER SHIELD

  • When dirt and clay oval tracks turn into “dust bowls”, even the best racing air cleaners can become clogged with dirt and dust
  • Made of open cell foam to keep large debris out of the filter element without restricting airflow
  • Fits snugly around 14” x 5” racing filters
  • Can be cleaned in the sink or even in the washing machine
  • Excellent for off-road truck applications
  • One per pack

AIR CLEANER WING NUT

  • Can be used with any Moroso Air Cleaner
  • They also match our extra long Valve CoverWing Nuts to add a look of uniformity to engine compartment
  • Made to fit only 1/4” -20 studs
  • Fits most popular air cleaners
  • One per pack

CARBURETOR AIR PAN KITS

  • Available for either single or dual carb applications
  • Unlike other brands, our Air Pan Kits are designed with a smooth radius at the intake area of the carburetor for improved airflow
  • Air Pan-to-hood sealing ring is manufactured of fire retardant foam, for added protection
  • All Air Pans measure 12” x 24”. Fire retardant foam measures 1-1/2” wide x 4” tall x 60” long

AIR CLEANER STUD ADAPTER

  • Allows Moroso and other air cleaners with 1/4” stud and wing nut to be used on carburetors with a 5/16” mounting hole
  • One end of the adapter features a 5/16” -18 male thread that screws into the carburetor, the other end features a 1/4” -20 female thread that accepts a standard air cleaner mounting stud
  • Clear zinc plating resists corrosion
  • Overall length: 7/8”
  • One per pack

Application:
  • UNIVERSAL NON APPLICATION SPECIFIC
UPC:
084663663109
Weight:
8.75 LBS
Color:
Chrome
Size:
8-1/2 x 2-3/8""
fbt:
related products
5 customers are viewing this product
Deal ends in:
Nov 27 2023, 00:00:01


Moroso Race/Street Air Cleaner 66310

Moroso Race/Street Air Cleaner 66310

MSRP:
Your Price: $96.98
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top