×
close

Hawk

Hawk DTC-70 Brake Pads HB143U.680

click to zoom in

The premier Hawk line, the DTC line of pads is a direct result of Hawk’s passion and commitment to Motorsports. When it comes to superior braking performance DTC has no equal.

DTC-05 (‘H’ Compound Code)
For lower torque Dirt Track Racing. This friction formulation provides very controllable, higher temperature performance.

  • Designed for use in Dirt Track racing
  • Controllable, higher-temperature perfomance.
  • Optimal Range: 100° – 500°
  • Min/Max Temp: 100° – 700°
  • Torque: Low

DTC-15 (‘A’ Compound Code)
For Dirt Circle Track Racing, these are a medium torque compound with superior release characteristics and excellent cold eectiveness.

  • Designed for high deceleration rates
  • High temperature fade resistance
  • Very low abrasive rotor wear
  • Optimal Range: 300° – 600°
  • Min/Max Temp: 200° – 800°
  • Torque: Medium

DTC-30 (‘W’ Compound Code)
For Dirt Circle Track applications. Uniquely controllable torque with smooth, consistent feel and bite. Superior release & torque control characteristics.

  • Wide Optimal temperature range
  • Smooth feel with good initial bite
  • Good cold effectiveness
  • Very low abrasive rotor wear
  • Optimal Range: 100° – 800°
  • Min/Max Temp: 100° – 1200°
  • Torque: Medium

DTC-50 (‘V’ Compound Code)
A pad that can be used as a split compound for tuning, and an endurance compound that can be used at the highest levels of racing.

  • Designed for high deleration rates
  • High temperature brake fade resistance
  • Very high torque with aggressive initial bite
  • Optimal Range: 500° – 1100°
  • Min/Max Temp: 300° – 1400°
  • Torque: High

DTC-60 (‘G’ Compound Code)
High torque with less initial bite than DTC 70. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force. Recommended for use with DTC-70 when split friction between front and rear axle is desired.

  • Slightly lower torque than DTC-70
  • Recommended for use with DTC-70 when split friction between front and rear axle is desired
  • Similar but lower torque profile as DTC-70
  • Very low abrasive rotor wear
  • Optimal Range: 700° – 1100°
  • Min/Max Temp: 400° – 1600°
  • Torque: High

DTC-70 (‘U’ Compound Code)
Extremely high torque with aggressive controllable initial bite. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force.

  • Designed for high deceleration rates
  • High temperature fade resistance
  • Very low abrasive rotor wear
  • Optimal Range: 800° – 1200°
  • Min/Max Temp: 400° – 1600°
  • Torque: High

Application:
  • 1997-1999 ACURA CL V6 3.0 Position: Front VTEC Engine
  • 1997-2001 ACURA INTEGRA TYPE R L4 1.8 B18C5 Position: Front VTEC Engine
  • 1991-1995 ACURA LEGEND V6 3.2 Position: Front N/R Engine
  • 1991-2005 ACURA NSX V6 3.0 Position: Front VTEC Engine
  • 1997-2005 ACURA NSX V6 3.2 Position: Front VTEC Engine
  • 1999-1999 ACURA NSX ALEX ZANARDI EDITION V6 3.2 Position: Front VTEC Engine
  • 1999-1999 ACURA NSX T V6 3.0 Position: Front VTEC Engine
  • 1999-1999 ACURA NSX T V6 3.2 Position: Front VTEC Engine
  • 1999-2001 ACURA NSX BASE V6 3.0 Position: Front VTEC Engine
  • 1999-2001 ACURA NSX BASE V6 3.2 Position: Front VTEC Engine
  • 1996-1998 ACURA RL V6 3.5 Position: Front VTEC Engine
  • 1995-1998 ACURA TL L5 2.5 Position: Front N/R Engine

Hawk

Hawk DTC-70 Brake Pads HB143U.680

Write a Review
Part Number:
HB143U.680
MSRP: $287.99
Your Price: $259.19
(You save $28.80 )
Deal ends in:
Nov 27 2023, 00:00:01


The premier Hawk line, the DTC line of pads is a direct result of Hawk’s passion and commitment to Motorsports. When it comes to superior braking performance DTC has no equal.

DTC-05 (‘H’ Compound Code)
For lower torque Dirt Track Racing. This friction formulation provides very controllable, higher temperature performance.

  • Designed for use in Dirt Track racing
  • Controllable, higher-temperature perfomance.
  • Optimal Range: 100° – 500°
  • Min/Max Temp: 100° – 700°
  • Torque: Low

DTC-15 (‘A’ Compound Code)
For Dirt Circle Track Racing, these are a medium torque compound with superior release characteristics and excellent cold eectiveness.

  • Designed for high deceleration rates
  • High temperature fade resistance
  • Very low abrasive rotor wear
  • Optimal Range: 300° – 600°
  • Min/Max Temp: 200° – 800°
  • Torque: Medium

DTC-30 (‘W’ Compound Code)
For Dirt Circle Track applications. Uniquely controllable torque with smooth, consistent feel and bite. Superior release & torque control characteristics.

  • Wide Optimal temperature range
  • Smooth feel with good initial bite
  • Good cold effectiveness
  • Very low abrasive rotor wear
  • Optimal Range: 100° – 800°
  • Min/Max Temp: 100° – 1200°
  • Torque: Medium

DTC-50 (‘V’ Compound Code)
A pad that can be used as a split compound for tuning, and an endurance compound that can be used at the highest levels of racing.

  • Designed for high deleration rates
  • High temperature brake fade resistance
  • Very high torque with aggressive initial bite
  • Optimal Range: 500° – 1100°
  • Min/Max Temp: 300° – 1400°
  • Torque: High

DTC-60 (‘G’ Compound Code)
High torque with less initial bite than DTC 70. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force. Recommended for use with DTC-70 when split friction between front and rear axle is desired.

  • Slightly lower torque than DTC-70
  • Recommended for use with DTC-70 when split friction between front and rear axle is desired
  • Similar but lower torque profile as DTC-70
  • Very low abrasive rotor wear
  • Optimal Range: 700° – 1100°
  • Min/Max Temp: 400° – 1600°
  • Torque: High

DTC-70 (‘U’ Compound Code)
Extremely high torque with aggressive controllable initial bite. Superior release and torque control characteristics. Brake pads designed for cars with high deceleration rates with or without down force.

  • Designed for high deceleration rates
  • High temperature fade resistance
  • Very low abrasive rotor wear
  • Optimal Range: 800° – 1200°
  • Min/Max Temp: 400° – 1600°
  • Torque: High

Application:
  • 1997-1999 ACURA CL V6 3.0 Position: Front VTEC Engine
  • 1997-2001 ACURA INTEGRA TYPE R L4 1.8 B18C5 Position: Front VTEC Engine
  • 1991-1995 ACURA LEGEND V6 3.2 Position: Front N/R Engine
  • 1991-2005 ACURA NSX V6 3.0 Position: Front VTEC Engine
  • 1997-2005 ACURA NSX V6 3.2 Position: Front VTEC Engine
  • 1999-1999 ACURA NSX ALEX ZANARDI EDITION V6 3.2 Position: Front VTEC Engine
  • 1999-1999 ACURA NSX T V6 3.0 Position: Front VTEC Engine
  • 1999-1999 ACURA NSX T V6 3.2 Position: Front VTEC Engine
  • 1999-2001 ACURA NSX BASE V6 3.0 Position: Front VTEC Engine
  • 1999-2001 ACURA NSX BASE V6 3.2 Position: Front VTEC Engine
  • 1996-1998 ACURA RL V6 3.5 Position: Front VTEC Engine
  • 1995-1998 ACURA TL L5 2.5 Position: Front N/R Engine
UPC:
840653071602
Weight:
4.80 LBS
Caliper Type:
OEM
Thickness:
0.680in
fbt:
related products
5 customers are viewing this product
Deal ends in:
Nov 27 2023, 00:00:01


Hawk DTC-70 Brake Pads HB143U.680

Hawk DTC-70 Brake Pads HB143U.680

MSRP: $287.99
Your Price: $259.19
(You save $28.80 )
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top