Cometic Head Gaskets are developed with the performance enthusiast in mind. With so many individual requirements for each motor Cometic offers a number of options to suit your specific motor and needs.

MLS
The Cometic MLS gasket is comprised of three layers of Stainless Steel. Cometic uses Stainless steel for increased strength, it’s ability to rebound and corrosion resistance. The outer layers of the gasket are embossed and coated on both sides with a flouroelastomer rubber based material (Viton) designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes. The Viton coating is heat resistant to 2500C or 4820F.

The center or shim layer of the gasket is comprised of an uncoated Stainless Steel layer, which can be varied to accommodate multiple thickness requirements. The MLS gasket is ideal for both aluminum heads to cast iron blocks and aluminum heads to aluminum blocks.

The composition of MLS will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is necessary. By design the MLS gasket promotes an even torque load across the sealing surface allowing for measurable reduced bore distortion.

CFM-20
A perforated steel core with an elastomer surface is ideal for head gaskets allowing heat to be drawn evenly across the gasket surface while providing maximum sealing characteristics when exposed to coolants and oils.

COPPER

Application:

• 1998-1999 BMW 323I BASE L6 2.5 M52
• 1998-1999 BMW 323IS BASE L6 2.5 M52
• 1992-1992 BMW 325I BASE L6 2.5 M50
• 1992-1992 BMW 325IS BASE L6 2.5 M50
• 1996-1999 BMW 328I BASE L6 2.8 M52
• 1996-1999 BMW 328IS BASE L6 2.8 M52
• 1991-1995 BMW 525I BASE L6 2.5 M50
• 1993-1993 BMW 525IT BASE L6 2.5 M50
• 1997-1999 BMW 528I BASE L6 2.8 M52
• 1997-1998 BMW Z3 ROADSTER L6 2.8 M52
• 1999-1999 BMW Z3 ROADSTER L6 2.5 M52