If you're looking for the best possible braking systems for your vehicle, look no further than Brembo. Designed and tested specifically for track day enthusiasts and for drivers who demand the utmost performance from their vehicles, the Brembo GT Big Brake Kits offer superlative performance for both street driving and demanding track day sessions.

Each Kit Includes

• Left and Right Calipers
• Left and Right Discs (Rotors)
• Goodridge Brake Lines
• Caliper Mounting Brackets and Hardware
• Brake Pads
• Installation Instructions

Ordering Notes

• Many of the Gran Turismo (GT) Systems require modification to, and/or complete remove of the OEM dust shield and/or backing plate.

• Not all Brembo GT BBKs will fit with factory wheels or factory sized-wheels. Some Brembo Big Brake Kits require larger-than-OEM wheels depending on size. Exact specifications necessary vary per vehicle and per kit. Please contact us via the eBay system for a caliper clearance worksheet before you buy if you need to be certain these brakes will fit your setup. We cannot accept returns on Big Brake Kits that have been installed or taken out of the original packaging.

• Brembo GT Systems are designed for vehicles at original ride height. Increased ride height is not compatible with the brake lines included in this system.

Quick Release Pad Retaining System: Incorporates anti-rattle feature (pictured) to eliminate noise and is designed for quick and easy pad changes.         All Brembo caliper mounting brackets are specifically designed to be application specific. They are precision milled from superior quality billet materials to ensure a precise fit and meet the strength requirements of high performance driving conditions.   Part numbers are clearly laser etched along with an unique serial number (S/N) for each part.  Pictured, are a few examples of axial and radial mount bracket designs.             By manufacturing the center section out of precision milled billet aluminum, a great deal of weight can be saved in this key location. This reduces both unsprung and rotating weight which benefits handling, acceleration overall vehicle dynamics. Brembo discs are coated with zinc ("gold" color) to provide an attractive corrosive resistant finish. Superior metallurgy and exceptional engineering allow Brembo discs to exceed in the most demanding conditions. Their advanced cast iron alloy lasts longer than any disc in the high performance and racing market.  Brembo's properitary floating hardware system permits a specific amount of radial and axial float which allows the disc to grow independent from the bell, averting thermal distortion when subjected to extreme temperatures. It also preloads the disc assembly to prevent premature wear and eliminate noise during street use. DISC THERMAL CAPACITY A Mass: The area located in the outer ring of the disc (shown in orange), dictates thermal capacity. This consists of annulus, width, diameter, air gap, and vane design. B Annulus: The area between two concentric circles. This dimension directly correlates to the friction surface area of the brake pad. C Disc Width: The overall thickness of the disc. Calipers are designed for a specific width. D Air Gap: The area located between the rotor plates surface is airgap. The amount of airgap is a crucial factor in channeling airflow. E Vane Design: Exclusive venting system that improves cooling capacity which increases resistance to brake fade.   Brake systems are designed to operate best within a prescribed temperature range. While modern high performance friction materials broaden this temperature range, it is critical that the brake disc in a system has adequate thermal capacity. Thermal capacity, or heat storage capacity, is determined by how much weight or mass is located in the outer ring section of the disc. This is the area where the friction surface of the disc meets the internal vanes (orange colored area in the diagram shown). The more mass located in this area, the more thermal capacity a disc has.