These wiring harnesses are built using new wire, new OEM terminals, and new OEM connector housings. Available for auto or manual transmission, and can be set up for universal use or made completely plug and play to your specific chassis. Your original engine harness might be required to get the body plugs from (specified below), but everything else on this harness is BRAND NEW.
Are you running a stock ECU? AEM? ECUMaster? Haltech? ProEFI? Infinity? GM coils? ID2000, ID1000, Bosch, Denso injectors, flex fuel, no problem. We carry in stock every connector for every single EMS, injector, and coil option so when you order a harness from us we can have it put together and sent your way as quickly as the next day for extremely urgent jobs! Equally important as speed and customizability is the fact that all of our harnesses are made here in the USA, while many companies send their production to be done in totalitarian countries with unethical labor practices.
In the options below we ask you to choose which start plug you have. We have pictures here to show you the 2 different styles so you can compare to what you have and select accordingly.
We understand there are a lot of options here, and it may be confusing. If you have questions - ASK BEFORE YOU BUY. If you chooose the wrong option, that's on you. While we can have send back the harness and fixed for you, its not free!
These wiring harnesses are built using new wire, new OEM terminals, and new OEM connector housings. Available for auto or manual transmission, and can be set up for universal use or made completely plug and play to your specific chassis. Your original engine harness might be required to get the body plugs from (specified below), but everything else on this harness is BRAND NEW.
Are you running a stock ECU? AEM? ECUMaster? Haltech? ProEFI? Infinity? GM coils? ID2000, ID1000, Bosch, Denso injectors, flex fuel, no problem. We carry in stock every connector for every single EMS, injector, and coil option so when you order a harness from us we can have it put together and sent your way as quickly as the next day for extremely urgent jobs! Equally important as speed and customizability is the fact that all of our harnesses are made here in the USA, while many companies send their production to be done in totalitarian countries with unethical labor practices.
In the options below we ask you to choose which start plug you have. We have pictures here to show you the 2 different styles so you can compare to what you have and select accordingly.
We understand there are a lot of options here, and it may be confusing. If you have questions - ASK BEFORE YOU BUY. If you chooose the wrong option, that's on you. While we can have send back the harness and fixed for you, its not free!
Weight:
15.00 LBS
fbt:
related products
5 customers are viewing this product
Deal ends in:
Nov 27 2023, 00:00:01
Tweak'd Performance 1JZ-GTE and 2JZ-GTE Engine Wiring Harness
This harness is specifically for people that need to control shifting through their OEM ECU while running an aftermarket ECU. Just select your setup from the drop-downs below.
Specifications: Material: SUS347 Stainless Steel Investment Cast Construction Features: High flow design with internal diameter of the twin ports are all the way out to gasket size 80mm ID outlet...
Artec's 2JZ GTE V-Band (Compact) shown with the new optional thermal management covering. These are for the people looking at reducing under bonnet temps and protecting other items such as wiring and...
These are the Genuine Toyota OEM vent hoses that go between the valve covers on a 2JZ-GTE engine. These get hardened with time and crack when you remove the valve covers, and they can allow oil to...
Introducing the new 2JZ-GTE 70mm V-Band manifold. This is the first of their "Big Daddy" range. The Big Daddy range will all be designed to run the 70mm V-Band flange that is found on the Garrett...