The angle that the stock cams are clocked to when installed at the stock location on factory cam gears not always the most effective for making power with aftermarket cams. Aftermarket cams with more aggressive lift and duration often need to be dialed in at a specific angle to optimize the powerband for your setup. Adjustable Cam Gears are important when installing cams as they allow you to dial in the cam degree for optimum performance.

Note: Â Only compatible with the exhaust side on VVTi engines.

Note: This is for one cam gear.


SUPER LIGHTWEIGHT DURALUMIN

Duralumin was used for both the outer gear and the inner pulley section;we were able to significantly drop the weight whilst increasing durability.

PRECISION
Both the pulley and the inner plate have been milled to perfection. This ensures itʼs functionality for timing accuracy and maximum durability.

ULTRA DURABLE

The hard anodizing surface treatment of the pulley increases the products surface durability substantially. This also decreases the wear rate on the gears teeth contact areas.

VISUALLY APPEALING
Although the initial decision of the hard anodizing was for functionality, we've also chosen the color for that extra visual impact to emphasize its quality.

INTAKE & EXHAUST COMPATIBLE
These have been designed to be compatible with both the intake and exhaust sides. With a user friendly design so that assists with adjustments - NOTE: Only compatible with the exhaust side on VVTi engines.

Additional Applications:

• Supra MKIV Twin-Turbo 93-98 JZA80
• Supra MKIV Non-Turbo 93-98 JZA80
• SC300/Soarer 92-00 Z30
• GS300/Aristo 91-97 S140