×
close

Haltech

Elite 2500 w/ Race Functions - Terminated Harness ECU Kit HT-151366

click to zoom in

Haltech Elite 2500 ECU takes the art of engine management to a brand new level. With a host of advanced features it offers cutting edge technology to tuners and performance enthusiasts world-wide. This ECU features 8 fuel and 8 ignition outputs, drive-by-wire and dual knock control and is ideal for 6, 8 cylinder or 3, 4 rotor engines.

FEATURES:

  • Waterproof Case
  • 8 x Fuel Injection Outputs
  • 8 x Ignition Outputs
  • 28 x Digital Outputs
  • 10 x Analogue Voltage Inputs
  • USB laptop communications
  • Drive By Wire (DBW) Throttle Control
  • 6 x Engine Position Inputs with extensive trigger type support
  • Programmable Injector Peak and Hold Currents
  • OBDII Capable – set and clear diagnostics trouble codes
  • New “ESP” calibration software – More intuitive and easier to use than ever
  • Dual CAN Bus communications for OEM and Haltech CAN expansion
  • User definable 5D Tuning – Tune by Gear, Cam Angle or any channel for ultimate tuning flexibility
  • Variable Cam Control – Independently Control up to 4 camshafts
  • Dual Channel Knock Control – With FFT analysis for accurate detection
  • Auto Tune Capabilities – Short and Long term fuel, ignition & boost learning
  • Staged Fuelling – Up to four stages of injectors
  • Multi-fuel Support- Support for Petrol (Gasoline), Methanol and Ethanol
  • E85 Flex Fuel Ready – With additional boost tables
  • Closed Loop Boost Control – Multiple Modes – Tune by gear, wheel speed or time
  • Closed Loop Idle Control – With learning for consistent idle stability
  • Closed Loop 02 Control – Dual bank control for precise tuning
  • Anti-Lag and Launch Control – Drag and Rally modes
  • Data logging – Internal memory & external laptop logging
  • Multi Level Engine Protection – Set limits for sensors and protect your engine
  • ECU comes fully enabled, no additional charges for advanced features

ENGINE SUITABILITY:

  • 1 to 12 Cylinder engines
  • Normally aspirated or forced induction
  • Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
  • Sequential, semi sequential, batch or multipoint injection patterns
  • Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI systems

Application:
  • 2006-2007 CADILLAC CTS V V8 6.0 DBW
  • 2010-2015 CHEVROLET CAMARO SS V8 6.2 DBW
  • 2005-2007 CHEVROLET CORVETTE BASE V8 6.0 DBW
  • 2008-2013 CHEVROLET CORVETTE V8 6.2 DBW
  • 2014-2017 CHEVROLET SS V8 6.2 DBW
  • 2005-2006 CHEVROLET SSR BASE V8 6.0 DBW
  • 2006-2008 CHEVROLET TRAILBLAZER SS V8 6.0 DBW
  • 2009-2009 PONTIAC G8 GXP V8 6.2 DBW
  • 2005-2006 PONTIAC GTO BASE V8 6.0 DBW

Haltech

Elite 2500 w/ Race Functions - Terminated Harness ECU Kit HT-151366

Write a Review
Part Number:
HT-151366
MSRP: $3,077.80
Your Price: $2,798.00
(You save $279.80 )
Deal ends in:
Nov 27 2023, 00:00:01


Haltech Elite 2500 ECU takes the art of engine management to a brand new level. With a host of advanced features it offers cutting edge technology to tuners and performance enthusiasts world-wide. This ECU features 8 fuel and 8 ignition outputs, drive-by-wire and dual knock control and is ideal for 6, 8 cylinder or 3, 4 rotor engines.

FEATURES:

  • Waterproof Case
  • 8 x Fuel Injection Outputs
  • 8 x Ignition Outputs
  • 28 x Digital Outputs
  • 10 x Analogue Voltage Inputs
  • USB laptop communications
  • Drive By Wire (DBW) Throttle Control
  • 6 x Engine Position Inputs with extensive trigger type support
  • Programmable Injector Peak and Hold Currents
  • OBDII Capable – set and clear diagnostics trouble codes
  • New “ESP” calibration software – More intuitive and easier to use than ever
  • Dual CAN Bus communications for OEM and Haltech CAN expansion
  • User definable 5D Tuning – Tune by Gear, Cam Angle or any channel for ultimate tuning flexibility
  • Variable Cam Control – Independently Control up to 4 camshafts
  • Dual Channel Knock Control – With FFT analysis for accurate detection
  • Auto Tune Capabilities – Short and Long term fuel, ignition & boost learning
  • Staged Fuelling – Up to four stages of injectors
  • Multi-fuel Support- Support for Petrol (Gasoline), Methanol and Ethanol
  • E85 Flex Fuel Ready – With additional boost tables
  • Closed Loop Boost Control – Multiple Modes – Tune by gear, wheel speed or time
  • Closed Loop Idle Control – With learning for consistent idle stability
  • Closed Loop 02 Control – Dual bank control for precise tuning
  • Anti-Lag and Launch Control – Drag and Rally modes
  • Data logging – Internal memory & external laptop logging
  • Multi Level Engine Protection – Set limits for sensors and protect your engine
  • ECU comes fully enabled, no additional charges for advanced features

ENGINE SUITABILITY:

  • 1 to 12 Cylinder engines
  • Normally aspirated or forced induction
  • Load sensing by Throttle Position (TPS), Manifold Absolute Pressure (MAP) or Mass Air Flow (MAF)
  • Sequential, semi sequential, batch or multipoint injection patterns
  • Distributor ignition systems, multi-coil systems or Haltech Multiplex CDI systems

Application:
  • 2006-2007 CADILLAC CTS V V8 6.0 DBW
  • 2010-2015 CHEVROLET CAMARO SS V8 6.2 DBW
  • 2005-2007 CHEVROLET CORVETTE BASE V8 6.0 DBW
  • 2008-2013 CHEVROLET CORVETTE V8 6.2 DBW
  • 2014-2017 CHEVROLET SS V8 6.2 DBW
  • 2005-2006 CHEVROLET SSR BASE V8 6.0 DBW
  • 2006-2008 CHEVROLET TRAILBLAZER SS V8 6.0 DBW
  • 2009-2009 PONTIAC G8 GXP V8 6.2 DBW
  • 2005-2006 PONTIAC GTO BASE V8 6.0 DBW
Weight:
20.00 LBS
fbt:
related products
5 customers are viewing this product
Deal ends in:
Nov 27 2023, 00:00:01


Elite 2500 w/ Race Functions - Terminated Harness ECU Kit HT-151366

Elite 2500 w/ Race Functions - Terminated Harness ECU Kit HT-151366

MSRP: $3,077.80
Your Price: $2,798.00
(You save $279.80 )
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top