×
close

K&N

K&N FIPK Intake Kit 57-9004

click to zoom in

K&N Fuel Injection Performance Kits (FIPK’s) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone;they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.

FEATURES

  • Guaranteed to Provide more HP and Increased Acceleration
  • Engineered to Specific Vehicle Design
  • Easy to Install, Usually in 90 minutes or less!
  • Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
  • Million Mile Limited Warranty
  • Replaces OEM Filter and Air Box
  • Air Filter is Washable and Reusable
  • Works with Original Equipment Manufacturer Computer Systems
  • Designed to use Factory Holes & Mounting Points Whenever Possible
  • Most are CARB Exempt and street legal in all 50 US States
Applications
  • 1987-1995 TOYOTA SUPRA L6 3.0 T

K&N

K&N FIPK Intake Kit 57-9004

Write a Review
Part Number:
57-9004
Nov 28 2022, 00:00:01

MSRP: $389.49
Your Price: $214.99
(You save $174.50 )

K&N Fuel Injection Performance Kits (FIPK’s) are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone;they use only non-metallic rotationally molded tubes that can reduce air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Fuel Injection Performance Kits (FIPK) virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER.
K&N Fuel Injection Performance Kits (FIPK) are truly state-of-the-art. K&N starts with the largest conical shaped high-flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversized air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). When possible, the filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next the filter is attached to a rotationally molded tube made from interlaced High Density Polyethylene (HDPE). This process allows the tube to be precisely shaped to reduce turbulence and accelerate airflow into the engine. This is why some tubes have unique shapes that are specifically engineered for each application. Finally the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today.

FEATURES

  • Guaranteed to Provide more HP and Increased Acceleration
  • Engineered to Specific Vehicle Design
  • Easy to Install, Usually in 90 minutes or less!
  • Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions)
  • Million Mile Limited Warranty
  • Replaces OEM Filter and Air Box
  • Air Filter is Washable and Reusable
  • Works with Original Equipment Manufacturer Computer Systems
  • Designed to use Factory Holes & Mounting Points Whenever Possible
  • Most are CARB Exempt and street legal in all 50 US States
Applications
  • 1987-1995 TOYOTA SUPRA L6 3.0 T

Weight:
3.47 LBS
Air Filter Color:
Red
Air Filter Height:
5 in (127 mm)
Air Filter Large End Diameter:
7.5 in (191 mm)
Air Filter Material:
Cotton Gauze
Air Filter Outlet Shape:
Round
CARB EO Number:
D-269-40
Clamp Material:
Stainless Steel
Clamp Style:
Regular
Clamps Included:
1
Couplers Included:
None
Estimated Horsepower Gain:
8.29 HP @ 5306 RPM
Horse Power Increase:
8 HP
Mounting Hardware Included:
Yes
Replacement Filter:
RC-2960
RPM:
5306
TUV Approved (Europe):
No
Type:
Gen I
Weight:
3.5 lb (1.6 kg)
Product Group:
K&N Intake Kit - Fuel Injection Performance Kits (FIPK)
fbt:
related products

5 customers are viewing this product
Nov 28 2022, 00:00:01

K&N FIPK Intake Kit 57-9004

K&N FIPK Intake Kit 57-9004

MSRP: $389.49
Your Price: $214.99
(You save $174.50 )
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top