“BRUTE STRENGTH” DIFFERENTIAL
The Strongest Clutch-Type Traction Differential Available!

• Legal for all drag race associations
• The thicker, webbed flange on the reinforced case reduces ring gear deflection, prolonging ring and pinion life
• Spider gears are forged from H-11 aircraft steel bar stock making them 50% stronger than Chevrolet “service package” gears
• Twenty-two friction discs (stock units have only 18 discs) improve bias ratio (torque split) by over 100%;heavy shock loads are more evenly distributed to the side gears for greater durability
• Extra-thick heat-treated spring plates and special chrome silicon springs yield over 800 lbs. of preload on the disc packs to insure an even bias ratio to the rear wheels for maximum traction
• Designed for 4.10 through 6.14 ratios (4-series)
• Stock-type axles are retained with original “C” clips;spacers or costly installation kits are not required
• Use only Moroso Climbing Gear Lube Nos. 34800 or 34801 with a bottle of Ford or GM Friction Modifier Additive

FORD 9” DIFFERENTIAL SHIM & REPLACEMENT PARTS KITS

• Kits include hard-to-find items needed to assemble Ford 9” center sections

RING GEAR BOLTS

• Manufactured from high strength alloy steel, exceeds Grade 8 specs, black oxide coating

DANA 60 U-BOLTS

• Moroso has an agreement with Dana Corporation to market hard-to-get replacement parts for the Dana 60, a popular rear axle in the Competition Eliminator and Super Stock classes.

U-JOINT GIRDLES

• Unique design provides more bearing surface for the universal joint bearing cap, for increased strength
• Manufactured from 7075-T6 aluminum with anodized finish
• Comes complete with fasteners
• One set per package

REAR END COVERS

• Available in either lightweight gold anodized aluminum or hand polished chromeplated steel
• Each cover includes a gasket and matching gold iridite or chrome fasteners

FILLER CAP KITS, UNIVERSAL

• Cap Kit No. 85280 and No. 85282 are knurled for easy grip removal and replacement
• Cap Kit No. 85283 is designed with larger, contoured grip for easy removal and installation
• These universal kits, available with steel or 6061-T6 aluminum bung, can be used on power steering tanks, radiator overflow tanks, valve covers, rear ends, filler neck plates, and other locations to replenish fluid, or serve as an inspection port
• Bungs can be welded to any suitable tank or plate
• Manufactured from 6061-T6 aluminum
• Includes O-Rings for leak-free sealing

REAR AXLE SPRING PERCHES, 2-1/2” WIDE

• Precision stamped for easy weld-on installation
• Two per package

Application:

• UNIVERSAL NON APPLICATION SPECIFIC