×
close

Moroso

Moroso Transmission Pan - For Ford E40D/4R100 Trans 42050

click to zoom in

TRANSMISSION PANS

  • Fully Fabricated, Aluminum Pans
  • One-piece Billet Rail
  • Reduce temperature and improve oil control
  • Dual fittings with magnetic drain plugs
  • Now includes serrated flange hex bolts (No. 42050 includes metric studs)

AUTOMATIC TRANSMISSION OIL COOLER/FILTER

  • Combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
  • Can be used on the street as an auxiliary cooler in conjunction with a stock cooler
  • Made of aluminum with 500 sq. inches of radiation surface for high heat transfer
  • Filter with magnet removes all wear particles over 5 microns in size
  • Dimensions: 3” diameter, 12” length, and weighs only 1 lb.
  • Very easy to install
  • Comes complete with filter cartridge, includes two 1/4” NPT to 3/8” line fittings and all necessary installation instructions

AUTOMATIC TRANSMISSION OIL COOLER/FILTER

  • Heavy Duty
  • More than double the surface area of our standard No. 41200 transmission cooler
  • Withstands up to 30 lbs. of pressure
  • Dual combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
  • Made of aluminum with 1072 sq. inches of radiation surface for high heat transfer
  • Filter with magnet removes all wear particles over 10 microns in size
  • Dimensions: 3-1/2” H x 6-1/4”W x 18” L and weighs 4.7 lbs.
  • Very easy to install, uses four mounting tabs;not recommended for street use
  • Comes complete with filter cartridge, includes two 1/4” NPT to -6AN fittings and all necessary installation instructions

AUTOMATIC TRANSMISSION EXPANSION TANK

  • Universal Fit
  • Prevents fluid mist from spraying on the race surface, behind your car (and tires)
  • Pressurized fluid is captured in the Expansion tank and will drain back into the transmission as it cools (if mounted as instructed)
  • Excess fluid may also be drained between rounds, by using the ball valve included
  • Includes tank mounting bracket
  • Meets IHRA Top Sportsman and Top Dragster requirement for One Pint Transmission Overflow Rule
  • Dimensions: 9-1/4” high x 2-1/4” wide

ROLLER PILOT BEARING

  • Unlike other roller pilot bearings, this high speed bearing is designed as a direct replacement in all Chevrolet V8’s and 90° V6’s (also fits 1976 and later V6 Buick)
  • Requires no modification to either crank or input shafts
  • Eliminates premature bearing failure and insures clean clutch release by maintaining true alignment of clutch disc to flywheel
  • Packed with high temperature grease for proper lubrication under extreme high heat conditions
  • Suitable for all high performance applications including drag, oval track/road race and street
  • 1.093” O.D. x.591” I.D. x.72” Depth
  • One per package

TRANSMISSION TAILSHAFT PLUG

  • Another time saver from Moroso
  • Eliminates the messy spilling of transmission fluid during transmission removal, replacement and storage
  • One per package

Moroso

Moroso Transmission Pan - For Ford E40D/4R100 Trans 42050

Write a Review
Part Number:
42050
MSRP: $410.18
Your Price: $342.99
(You save $67.19 )
Deal ends in:
Nov 27 2023, 00:00:01


TRANSMISSION PANS

  • Fully Fabricated, Aluminum Pans
  • One-piece Billet Rail
  • Reduce temperature and improve oil control
  • Dual fittings with magnetic drain plugs
  • Now includes serrated flange hex bolts (No. 42050 includes metric studs)

AUTOMATIC TRANSMISSION OIL COOLER/FILTER

  • Combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
  • Can be used on the street as an auxiliary cooler in conjunction with a stock cooler
  • Made of aluminum with 500 sq. inches of radiation surface for high heat transfer
  • Filter with magnet removes all wear particles over 5 microns in size
  • Dimensions: 3” diameter, 12” length, and weighs only 1 lb.
  • Very easy to install
  • Comes complete with filter cartridge, includes two 1/4” NPT to 3/8” line fittings and all necessary installation instructions

AUTOMATIC TRANSMISSION OIL COOLER/FILTER

  • Heavy Duty
  • More than double the surface area of our standard No. 41200 transmission cooler
  • Withstands up to 30 lbs. of pressure
  • Dual combination cooler/filters use “heat sink design” to dissipate the excessive heat build up in racing transmissions
  • Made of aluminum with 1072 sq. inches of radiation surface for high heat transfer
  • Filter with magnet removes all wear particles over 10 microns in size
  • Dimensions: 3-1/2” H x 6-1/4”W x 18” L and weighs 4.7 lbs.
  • Very easy to install, uses four mounting tabs;not recommended for street use
  • Comes complete with filter cartridge, includes two 1/4” NPT to -6AN fittings and all necessary installation instructions

AUTOMATIC TRANSMISSION EXPANSION TANK

  • Universal Fit
  • Prevents fluid mist from spraying on the race surface, behind your car (and tires)
  • Pressurized fluid is captured in the Expansion tank and will drain back into the transmission as it cools (if mounted as instructed)
  • Excess fluid may also be drained between rounds, by using the ball valve included
  • Includes tank mounting bracket
  • Meets IHRA Top Sportsman and Top Dragster requirement for One Pint Transmission Overflow Rule
  • Dimensions: 9-1/4” high x 2-1/4” wide

ROLLER PILOT BEARING

  • Unlike other roller pilot bearings, this high speed bearing is designed as a direct replacement in all Chevrolet V8’s and 90° V6’s (also fits 1976 and later V6 Buick)
  • Requires no modification to either crank or input shafts
  • Eliminates premature bearing failure and insures clean clutch release by maintaining true alignment of clutch disc to flywheel
  • Packed with high temperature grease for proper lubrication under extreme high heat conditions
  • Suitable for all high performance applications including drag, oval track/road race and street
  • 1.093” O.D. x.591” I.D. x.72” Depth
  • One per package

TRANSMISSION TAILSHAFT PLUG

  • Another time saver from Moroso
  • Eliminates the messy spilling of transmission fluid during transmission removal, replacement and storage
  • One per package

UPC:
084663420504
Weight:
15.00 LBS
Depth:
3.642";Product Group=Moroso Transmission Pans"
fbt:
related products
5 customers are viewing this product
Deal ends in:
Nov 27 2023, 00:00:01


Moroso Transmission Pan - For Ford E40D/4R100 Trans 42050

Moroso Transmission Pan - For Ford E40D/4R100 Trans 42050

MSRP: $410.18
Your Price: $342.99
(You save $67.19 )
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top