×
close

MSD

Street Fire Spark Plug Wire Set 5577

click to zoom in

The MSD 8.5mm Super Conductor Wire is “the” performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire;incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”.

This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Dual Crimp Terminals
All of the MSD spark plug terminals feature “Dual Crimp” terminals. As the name implies, the terminals feature two crimps: One for the sleeve of the wire and another separate crimp to grasp the conductor of the wire.
By having separate crimps, the conductor doesn’t need to bent 180° and get squeezed between the terminal and sleeve. The individual conductor crimp produces a more secure crimp and there is less chance of spark arcing to the engine block or exhaust through the boot. In fact, we feel so strongly about our Dual Crimp terminals that every factory crimped plug wire is guaranteed not to “pull off” for FIVE years!

Application:
  • 1996-2004 CHEVROLET ASTRO
  • 1996-2004 CHEVROLET BLAZER
  • 1996-1998 CHEVROLET C1500 V6 4.3
  • 1996-2004 CHEVROLET EXPRESS 1500 V6 4.3
  • 1996-2004 CHEVROLET EXPRESS 2500 V6 4.3
  • 1996-1998 CHEVROLET K1500 V6 4.3
  • 1996-2003 CHEVROLET S10 V6 4.3
  • 1998-2000 CHEVROLET S10 BASE V6 4.3
  • 1998-2000 CHEVROLET S10 LS V6 4.3
  • 1998-2000 CHEVROLET S10 ZR2 V6 4.3
  • 1998-1998 CHEVROLET S10 SS V6 4.3
  • 1999-2000 CHEVROLET S10 XTREME V6 4.3

MSD

Street Fire Spark Plug Wire Set 5577

Write a Review
Part Number:
5577
MSRP:
Your Price: $67.77
Deal ends in:
Nov 27 2023, 00:00:01


The MSD 8.5mm Super Conductor Wire is “the” performance wire.Engineered from the inside out, the 8.5 offers everything you have everwanted in a wire;incredibly low resistance without electronic interference! In a single 12 inch length of Super Conductor Wire there is only 40 – 50 ohms of resistance! That is the lowest resistance of any helically wound wire. To accomplish this, we use a copper alloy conductor due to it’s great voltage carrying capabilities. The low resistance results in less loss in spark energy so more reaches the spark plug. The conductor is wound extremely tight around a special center core. So tight in fact, that there is over 40 feet of conductor wrapped into a single foot of plug wire. This winding procedure, combined with a ferro-magnetic impregnated center core, produces an extremely effective Electro Magnetic Interference (EMI) “choke”.

This choke, or suppression capability, keeps the EMI inside the wire where it cannot interfere with other electronics on your vehicle. The outer sleeve that surrounds the conductor assembly is just as impressive. A proprietary blend of silicone and synthetic material produce a sleeve that is highly resistant to high heat as well as abrasion and tears. The MSD 8.5mm Super Conductor Plug Wire is available in Universal Kits and Bulk Lengths.

Dual Crimp Terminals
All of the MSD spark plug terminals feature “Dual Crimp” terminals. As the name implies, the terminals feature two crimps: One for the sleeve of the wire and another separate crimp to grasp the conductor of the wire.
By having separate crimps, the conductor doesn’t need to bent 180° and get squeezed between the terminal and sleeve. The individual conductor crimp produces a more secure crimp and there is less chance of spark arcing to the engine block or exhaust through the boot. In fact, we feel so strongly about our Dual Crimp terminals that every factory crimped plug wire is guaranteed not to “pull off” for FIVE years!

Application:
  • 1996-2004 CHEVROLET ASTRO
  • 1996-2004 CHEVROLET BLAZER
  • 1996-1998 CHEVROLET C1500 V6 4.3
  • 1996-2004 CHEVROLET EXPRESS 1500 V6 4.3
  • 1996-2004 CHEVROLET EXPRESS 2500 V6 4.3
  • 1996-1998 CHEVROLET K1500 V6 4.3
  • 1996-2003 CHEVROLET S10 V6 4.3
  • 1998-2000 CHEVROLET S10 BASE V6 4.3
  • 1998-2000 CHEVROLET S10 LS V6 4.3
  • 1998-2000 CHEVROLET S10 ZR2 V6 4.3
  • 1998-1998 CHEVROLET S10 SS V6 4.3
  • 1999-2000 CHEVROLET S10 XTREME V6 4.3
Weight:
1.70 LBS
fbt:
related products
5 customers are viewing this product
Deal ends in:
Nov 27 2023, 00:00:01


Street Fire Spark Plug Wire Set 5577

Street Fire Spark Plug Wire Set 5577

MSRP:
Your Price: $67.77
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top