This Adjustable Pressure Switch offers a solution for triggering staged fuel pump(s) based on boost pressure. This normally open (N.O.) switch features a 3-15psi adjustable set point to match any application. The stainless steel body features a 1/8 NPT male port. Connector and pins are included (assembly required).
INSTALLATION NOTES:
- DO NOT route the main power for a fuel pump through this switch. Use the switch to trigger a relay.
- This switch may be used to trigger any device, not just a fuel pump, as long as the current demand is less than 0.5 Amp.
- Review the installation instructions in the above link prior to purchasing.
- The switch DOES NOT come pre-set to any particular pressure, it MUST be calibrated using the method outlined in the installation instructions.
- This switch may also be used in other fluid applications (oil, fuel, coolant, etc). DO NOT use with brake fluid.
Application:
- UNIVERSAL NON APPLICATION SPECIFIC
