×
close

B&M Racing

B&M Racing Holeshot 2400 Torque Converter - Requires small 10.75 inch bolt circle flexplate or dual pattern flexplate 20412

click to zoom in

A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated.

Application:
  • 1973-1975 BUICK APOLLO Automatic Trans THM350 Trans
  • 1971-1973 BUICK CENTURION Automatic Trans THM350 Trans
  • 1971-1973 BUICK CENTURION Automatic Trans THM400 Trans
  • 1973-1977 BUICK CENTURY Automatic Trans THM400 Trans
  • 1973-1981 BUICK CENTURY Automatic Trans THM350 Trans
  • 1975-1975 BUICK CENTURY Automatic Trans Requires small 10.75 inch bolt circle flexplate or dual pattern flexplate
  • 1965-1981 BUICK ELECTRA Automatic Trans THM400 Trans
  • 1975-1980 BUICK ELECTRA Automatic Trans THM350 Trans
  • 1975-1976 BUICK ELECTRA Automatic Trans THM375/M39 Trans
  • 1970-1981 BUICK ESTATE WAGON Automatic Trans THM400 Trans
  • 1975-1976 BUICK ESTATE WAGON Automatic Trans THM375/M39 Trans
  • 1975-1980 BUICK ESTATE WAGON Automatic Trans THM350 Trans

B&M Racing

B&M Racing Holeshot 2400 Torque Converter - Requires small 10.75 inch bolt circle flexplate or dual pattern flexplate 20412

Write a Review
Part Number:
20412
MSRP: $529.19
Your Price: $504.35
(You save $24.84 )
Deal ends in:
Nov 27 2023, 00:00:01


A higher than stock stall speed as delivered by the Holeshot converter will provide several advantages and benefits in vehicles with modified engines. Many modifications, particularly big cams, tend to reduce low end power and torque. The high stall converter allows the engine to launch the car at higher rpm where more torque is available. The Holeshot is generally a very good choice for the typical street machine that is looking for better launch capability and more strength. Street rods with modified engines will also benefit from a Holeshot converter. If your vehicle is equipped with a plate type nitrous system, you will need a Nitrous Holeshot!! Stall speed listings are based on engines producing 230lb. ft. of torque at 2,500 rpm. More torque at 2,500 rpm will give you more stall speed, less torque at 2,500 rpm will give you less stall speed than the stall speed ratings indicated.

Application:
  • 1973-1975 BUICK APOLLO Automatic Trans THM350 Trans
  • 1971-1973 BUICK CENTURION Automatic Trans THM350 Trans
  • 1971-1973 BUICK CENTURION Automatic Trans THM400 Trans
  • 1973-1977 BUICK CENTURY Automatic Trans THM400 Trans
  • 1973-1981 BUICK CENTURY Automatic Trans THM350 Trans
  • 1975-1975 BUICK CENTURY Automatic Trans Requires small 10.75 inch bolt circle flexplate or dual pattern flexplate
  • 1965-1981 BUICK ELECTRA Automatic Trans THM400 Trans
  • 1975-1980 BUICK ELECTRA Automatic Trans THM350 Trans
  • 1975-1976 BUICK ELECTRA Automatic Trans THM375/M39 Trans
  • 1970-1981 BUICK ESTATE WAGON Automatic Trans THM400 Trans
  • 1975-1976 BUICK ESTATE WAGON Automatic Trans THM375/M39 Trans
  • 1975-1980 BUICK ESTATE WAGON Automatic Trans THM350 Trans
Weight:
33.50 LBS
Additional Contents:
New needle bearings
Bolt Circle Diameter (in):
10.75
Flexplate Change Needed:
Yes
Furnace Brazed:
Yes
Item Grade:
High Performance
Material:
Steel
Stall Torque Ratio:
2300 to 2500 RPM stall
fbt:
related products
5 customers are viewing this product
Deal ends in:
Nov 27 2023, 00:00:01


B&M Racing Holeshot 2400 Torque Converter - Requires small 10.75 inch bolt circle flexplate or dual pattern flexplate 20412

B&M Racing Holeshot 2400 Torque Converter - Requires small 10.75 inch bolt circle flexplate or dual pattern flexplate 20412

MSRP: $529.19
Your Price: $504.35
(You save $24.84 )
Need help? We're available at940-222-5499 - Email us at[email protected] orlive help
to top